BTM 2000 - Multimeter PCE Instruments - Free user manual and instructions
Find the device manual for free BTM 2000 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Model | BTM 2000 |
| Brand | PCE Instruments |
| Dimensions (approx.) | 180 x 90 x 40 mm |
| Weight (approx.) | 0.5 kg |
| Power Supply | 9V battery (6F22, included) |
| Display | LCD, max 1999 counts |
| DC Voltage Range | 200 mV - 600 V |
| AC Voltage Range | 200 V - 600 V |
| DC Current Range | 200 µA - 10 A |
| Resistance Range | 200 Ω - 2 MΩ |
| Diode Test | Yes, forward voltage drop |
| Continuity Test | Yes, audible beep |
| Safety Rating | CAT III 600V |
| Auto-Ranging | Yes |
| Data Hold | Yes |
| Maintenance | Clean with dry cloth; avoid moisture |
| Spare Parts | Test leads, battery, fuse |
| Repairability | Replaceable battery and fuse; professional service required |
Frequently Asked Questions - BTM 2000 PCE Instruments
How do I replace the battery in the BTM 2000?
Open the battery compartment cover on the back. Replace the 9V battery with a new one, ensuring correct polarity. Close the cover securely.
What is the maximum voltage I can measure with the BTM 2000?
The maximum voltage is 600 V AC or DC. Do not exceed this to avoid damage or injury.
Does the BTM 2000 have an auto-ranging function?
Yes, the BTM 2000 features auto-ranging for voltage, current, and resistance measurements.
How do I test continuity with this multimeter?
Turn the dial to the continuity/ohms position. Connect the test leads across the circuit. The meter will beep if the resistance is low (<30Ω).
What does 'CAT III 600V' mean?
It indicates the meter is designed for measurements in building installations (e.g., distribution boards) up to 600 V with a transient overvoltage category III.
Can I measure current above 10A?
No, the maximum current is 10 A. Use the 10A input jack for currents up to 10A. For higher currents, use a clamp meter.
Why does the display show 'OL'?
'OL' means overload, indicating the measurement exceeds the selected range or the maximum input. Switch to a higher range if available.
How do I clean the BTM 2000?
Use a soft dry cloth to wipe the housing. Do not use solvents or water. Keep the meter dry and store in a clean environment.
What type of fuse does the BTM 2000 use?
It uses a 500 mA/250V and a 10A/250V fast-blow fuse. Check the fuse holder near the battery compartment.
Is the BTM 2000 suitable for automotive diagnostics?
Yes, it can measure DC voltage, current, and resistance typical in automotive electrical systems, but avoid measuring high-energy circuits.
User questions about BTM 2000 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual BTM 2000 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BTM 2000 by PCE Instruments.
USER MANUAL BTM 2000 PCE Instruments
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCE Instruments
Model : BTM 2000
Category : Multimeter