DRX-3.4 - Home Theater System Integra - Free user manual and instructions
Find the device manual for free DRX-3.4 Integra in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Theater AV Receiver |
| Brand | Integra |
| Model | DRX-3.4 |
| Channels | 9.2 |
| Power Output | 120 W per channel (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2 ch driven) |
| Dimensions (W x H x D) | 435 x 173.5 x 378 mm |
| Weight | 11.2 kg |
| Power Consumption | 650 W (standby 0.1 W) |
| Audio Formats | Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio |
| Video Features | 8K/60Hz, 4K/120Hz, HDR10+, Dolby Vision, HLG |
| HDMI Inputs/Outputs | 7 inputs / 2 outputs (including eARC) |
| Wireless Connectivity | Wi-Fi, Bluetooth, AirPlay 2, Chromecast built-in |
| Room Calibration | AccuEQ with AccuReflex |
| Maintenance | Clean with soft, dry cloth. Avoid solvents and abrasive cleaners. |
| Safety | Do not expose to rain or moisture. Ensure proper ventilation. Unplug during storms. |
| Spare Parts & Repairability | Contact authorized service center for replacement parts. Repairs should be done by qualified personnel. |
| General Information | Free user manual available for download at notice-facile.com in PDF format. |
Frequently Asked Questions - DRX-3.4 Integra
How do I connect my speakers to the DRX-3.4?
Use banana plugs or bare wire. Connect each speaker to the corresponding terminal (Front, Center, Surround, etc.) and ensure polarity (+/-) is correct.
How do I set up the receiver for Dolby Atmos?
Connect Atmos-enabled or height speakers to the designated height channels. In the setup menu, configure the speaker layout and run AccuEQ calibration.
What is AccuEQ and how do I use it?
AccuEQ is an automatic room calibration system. Connect the supplied microphone, place it at the listening position, and run AccuEQ from the setup menu to optimize audio.
Can I stream music from my phone?
Yes, via Bluetooth, AirPlay 2, or Chromecast built-in. Alternatively, use Wi-Fi to stream from services like Spotify or Tidal.
How do I update the firmware?
Connect the receiver to the internet via Ethernet or Wi-Fi. Go to Setup -> Firmware Update and select 'Update via Network'. Follow on-screen instructions.
What should I do if the receiver turns off unexpectedly?
Check for overheating: ensure ventilation slots are clear. Also verify speaker impedance is 4-16 ohms. Reduce volume or disconnect speakers to test.
How do I reset the receiver to factory defaults?
With the unit off, hold the ON/STANDBY button for 5 seconds. Alternatively, use the menu: Setup -> Miscellaneous -> Factory Reset.
Does the DRX-3.4 support 8K video?
Yes, it supports 8K/60Hz and 4K/120Hz pass-through with HDR10+, Dolby Vision, and HLG.
How do I clean the receiver?
Unplug the unit. Use a soft, dry cloth to wipe the exterior. Do not use chemical cleaners or spray liquids directly.
Where can I find the user manual?
The manual is available for free download at notice-facile.com in PDF format. Search for Integra DRX-3.4.
User questions about DRX-3.4 Integra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Theater System in PDF format for free! Find your manual DRX-3.4 - Integra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DRX-3.4 by Integra.
USER MANUAL DRX-3.4 Integra
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Integra
Model : DRX-3.4
Category : Home Theater System