X-2800 - Air purifier XPower - Free user manual and instructions
Find the device manual for free X-2800 XPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Purifier |
| Model | X-2800 |
| Dimensions (W x D x H) | 40 cm x 20 cm x 60 cm |
| Weight | 5 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 50 W |
| Filtration System | Pre-filter, HEPA filter, Activated Charcoal filter, Ionizer |
| Fan Speeds | 3 levels (Low, Medium, High) |
| Timer | 1, 2, 4, 8 hours |
| Coverage Area | Up to 40 m² |
| Noise Level | 30 - 55 dB |
| CADR (Clean Air Delivery Rate) | 200 m³/h |
| Display | Touch control panel with LED indicators |
| Filter Replacement Indicator | Yes |
| Sleep Mode | Yes |
| Auto Mode | Yes (with air quality sensor) |
| Safety Features | Automatic shut-off when tilted, overheating protection |
| Maintenance | Clean pre-filter monthly; replace HEPA filter every 6-12 months |
| Spare Parts | Replacement filter set available |
| Warranty | 1 year |
Frequently Asked Questions - X-2800 XPower
How often should I replace the HEPA filter on the XPower X-2800?
The HEPA filter should be replaced every 6 to 12 months, depending on usage and air quality. The filter replacement indicator will alert you when it's time.
Can I wash the HEPA filter?
No, the HEPA filter is not washable. Only the pre-filter can be cleaned with a vacuum or mild soap and water. The HEPA filter must be replaced.
Does the X-2800 produce ozone?
The ionizer function may produce trace amounts of ozone, but the purifier is designed to meet safety standards. You can turn off the ionizer if you prefer.
What is the coverage area of the XPower X-2800?
The purifier is suitable for rooms up to 40 m² with normal ceiling height.
Is the X-2800 safe to leave on overnight?
Yes, it has a sleep mode with reduced noise and dimmed lights, making it safe for overnight use. It also shuts off automatically if tipped over.
How do I reset the filter replacement indicator?
After replacing the filter, press and hold the Filter Reset button (usually on the control panel) for 3 seconds until the indicator light turns off.
What does the auto mode do?
Auto mode uses a built-in air quality sensor to automatically adjust fan speed based on the current air quality. The display shows the air quality level.
Can I use the purifier in a room with high humidity?
Yes, but avoid placing it in direct contact with water. High humidity may require more frequent pre-filter cleaning. Do not use in a bathroom.
Why does my unit make a clicking sound?
Clicking sounds are normal when the unit adjusts fan speed or when the ionizer is activated. If the sound is continuous, check if the air intake is blocked.
Where can I buy replacement filters for the X-2800?
Replacement filters are available on the XPower official website and authorized retailers. Look for model-specific filter sets.
User questions about X-2800 XPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air purifier in PDF format for free! Find your manual X-2800 - XPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X-2800 by XPower.
USER MANUAL X-2800 XPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : XPower
Model : X-2800
Category : Air purifier