FR50 Pearl - To scan Newland - Free user manual and instructions
Find the device manual for free FR50 Pearl Newland in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Barcode Scanner |
| Model | FR50 Pearl |
| Brand | Newland |
| Dimensions (L x W x H) | 170 mm x 70 mm x 100 mm |
| Weight | Approx. 200 g |
| Power Source | USB bus power (5V, 500mA) |
| Interface | USB HID, USB VCP, RS-232 optional |
| Scan Technology | Laser or 2D CMOS imager |
| Supported Symbologies | 1D: all standard; 2D: QR, Data Matrix, PDF417, etc. |
| Scan Angle | Horizontal 40°, Vertical 30° |
| Depth of Field | 10 cm to 30 cm (typical) |
| Laser Class | Class 2 (laser models) |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 95% non-condensing |
| Drop Resistance | 1.5 m onto concrete |
| Protection Rating | IP42 |
| Maintenance | Clean lens with soft, dry cloth; avoid solvents |
| Spare Parts | Replacement cable, trigger button assembly |
| Repairability | User-replaceable cable; service center for other repairs |
| Security | No user-serviceable internal parts; refer to manual for safe handling |
| General Information | Designed for retail, logistics, and industrial use |
Frequently Asked Questions - FR50 Pearl Newland
How do I connect the scanner to my computer?
Plug the USB cable into your computer. The scanner will be automatically recognized as a HID keyboard or serial device. You may need to install drivers for serial mode.
Why is my scanner not scanning?
Check the cable connection. Ensure the scanner is powered (LED should light up). Clean the scan window. If using a laser model, avoid aiming at eyes.
How do I configure the scanner to add a suffix or prefix?
Use the programming barcodes in the user manual. Typically, you scan a 'Enter Setup' barcode, then the desired configuration barcode, and finally 'Exit Setup'.
Does the scanner support 2D codes like QR?
Yes, the FR50 Pearl supports both 1D and 2D barcodes, including QR codes, Data Matrix, PDF417, and more.
Can I use the scanner wirelessly?
The standard model is wired (USB). Some variants may have Bluetooth; check your specific model. For wired, the cable provides both power and data.
How do I clean the scanner?
Turn off the scanner and unplug it. Use a soft, lint-free cloth lightly dampened with water or a mild cleaner to wipe the exterior. Do not spray directly. Clean the scan window gently.
What should I do if the scanner reads barcodes incorrectly?
Ensure the barcode is not damaged. Check if the scanner is set to the correct symbology. Reset to factory defaults using the setup barcode.
Is the scanner compatible with my POS system?
The scanner emulates a keyboard, so it works with most POS systems. For special interfaces (e.g., RS-232), you may need a separate adapter and proper configuration.
How do I update the firmware?
Firmware updates are available from Newland's website. Connect the scanner to a PC, download the update tool, and follow the instructions.
What is the warranty period?
The standard warranty is 1 year from the date of purchase. Extended warranties may be available through the retailer.
User questions about FR50 Pearl Newland
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your To scan in PDF format for free! Find your manual FR50 Pearl - Newland and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FR50 Pearl by Newland.
USER MANUAL FR50 Pearl Newland
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Newland
Model : FR50 Pearl
Category : To scan