PFS4226-24GT-360 - Switch Dahua Technology - Free user manual and instructions
Find the device manual for free PFS4226-24GT-360 Dahua Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed PoE+ Switch |
| Ports | 24 x 10/100/1000BASE-T PoE+ (up to 30W per port), 2 x 1000BASE-X SFP |
| PoE Budget | 360W total |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| MAC Address Table | 8K entries |
| Dimensions (W x D x H) | 440 mm x 200 mm x 44 mm (19-inch rackmount, 1U) |
| Weight | 3.5 kg |
| Power Supply | AC 100-240V, 50/60Hz, built-in |
| Max Power Consumption | 400W (including PoE) |
| Operating Temperature | 0°C to 50°C |
| Humidity | 10% to 90% non-condensing |
| Management Features | VLAN, QoS, SNMP v1/v2c/v3, IGMP snooping, port mirroring, link aggregation, STP/RSTP/MSTP, ACL |
| Security | 802.1X, MAC filtering, DHCP snooping, ARP inspection, SSH/SSL, ACL |
| Warranty | 2 years |
| Maintenance | Clean with dry cloth; avoid liquids; ensure proper ventilation |
| Repairability | No user-serviceable parts; contact authorized service center for repairs |
Frequently Asked Questions - PFS4226-24GT-360 Dahua Technology
How do I reset the PFS4226-24GT-360 to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the system LED blinks. Release the button; the switch will reboot with factory settings.
What is the maximum PoE power per port?
Each PoE+ port can deliver up to 30W, but the total PoE budget is 360W, so power distribution depends on connected devices.
Can I use fiber uplinks on this switch?
Yes, the switch has 2 SFP slots for 1000BASE-X fiber modules (not included). They support Gigabit fiber connections.
Does the switch support VLAN configuration?
Yes, it supports 802.1Q VLAN with up to 4094 VLAN groups. You can create, modify, and assign ports to VLANs via the web interface or CLI.
How do I access the web management interface?
Connect your computer to any port. The default IP is 192.168.1.1. Set your PC to a static IP in the same subnet (e.g., 192.168.1.100). Open a browser and enter the IP. Default username/password is admin/admin.
What should I do if the switch stops providing PoE power?
First, check the total power consumption does not exceed 360W. If overloaded, disconnect some PoE devices. Also verify the power supply and cable connections. If the issue persists, restart the switch.
Is the switch fanless?
No, this model has built-in fans for active cooling. Ensure proper ventilation around the switch to prevent overheating.
Can I mount the switch on a wall?
The switch is designed for 19-inch rack mounting with included brackets. Wall mounting is not recommended unless using an appropriate shelf or enclosure.
How do I update the firmware?
Download the latest firmware from Dahua's official website. Log in to the web interface, go to System > Firmware Upgrade, upload the file, and follow instructions. Do not power off during upgrade.
What network protocols does the switch support?
It supports IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1Q, 802.1p, 802.1D, 802.1w, 802.1s, 802.1X and many management protocols like SNMP, RMON, IGMP, etc.
User questions about PFS4226-24GT-360 Dahua Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual PFS4226-24GT-360 - Dahua Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PFS4226-24GT-360 by Dahua Technology.
USER MANUAL PFS4226-24GT-360 Dahua Technology
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dahua Technology
Model : PFS4226-24GT-360
Category : Switch