PFS3110-8ET-96 - Switch Dahua Technology - Free user manual and instructions
Find the device manual for free PFS3110-8ET-96 Dahua Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PoE+ Switch (Managed) |
| Model | PFS3110-8ET-96 |
| Brand | Dahua Technology |
| Ports | 8 x 10/100/1000 Mbps PoE+ Ports |
| PoE Budget | 96W (up to 30W per port) |
| Uplink Ports | 2 x Gigabit SFP (dedicated) |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| MAC Address Table | 8K |
| Dimensions (W x D x H) | 200 mm x 120 mm x 45 mm |
| Weight | 0.82 kg |
| Power Supply | Internal, AC 100-240V, 50/60Hz |
| Power Consumption | ≤ 110W (including PoE output) |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| VLAN Support | 802.1Q VLAN (up to 256 groups) |
| Quality of Service (QoS) | 802.1p, DSCP, port-based QoS |
| Management | Web GUI, CLI, SNMP, RMON |
| Mounting | Desktop or wall-mount (brackets included) |
| Cleaning and Maintenance | With device off, wipe with dry, lint-free cloth |
| Safety Certifications | CE, FCC, RoHS |
| Repairability | No user-serviceable parts; contact support |
Frequently Asked Questions - PFS3110-8ET-96 Dahua Technology
What is the PoE budget of the Dahua PFS3110-8ET-96?
The total PoE budget is 96W, with up to 30W per port, suitable for powering IP cameras and access points.
How do I reset the switch to factory defaults?
Press and hold the reset button on the front panel for about 10 seconds until all LEDs blink, then release. The switch will reboot with factory settings.
Can I mount the switch on a wall?
Yes, the switch includes wall-mount brackets and screws for secure installation on a flat vertical surface.
What types of cables are supported?
Use Cat5e or higher Ethernet cables for 10/100/1000 Mbps connections. For fiber uplinks, use SFP modules (not included).
Does this switch support VLANs?
Yes, it supports 802.1Q VLAN with up to 256 VLAN groups for segmenting network traffic.
How can I access the switch management interface?
By default, the switch obtains an IP via DHCP. Use the included software or check the router's DHCP list to find the IP, then access via web browser.
What is the maximum power consumption?
The maximum power consumption, including PoE output, is 110W. The internal power supply accepts 100-240V AC.
Can I use this switch for security camera systems?
Absolutely. With 8 PoE+ ports and 96W budget, it is ideal for powering and connecting IP cameras in surveillance networks.
Does the switch support link aggregation?
Yes, it supports static link aggregation (LAG) to combine multiple ports for increased bandwidth and redundancy.
What LED indicators are available?
Each port has link/activity and PoE status LEDs. Additionally, there are system and power LEDs on the front panel.
User questions about PFS3110-8ET-96 Dahua Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual PFS3110-8ET-96 - Dahua Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PFS3110-8ET-96 by Dahua Technology.
USER MANUAL PFS3110-8ET-96 Dahua Technology
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dahua Technology
Model : PFS3110-8ET-96
Category : Switch