DCi 2|300N - Receiver CROWN - Free user manual and instructions
Find the device manual for free DCi 2|300N CROWN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Networkable Power Amplifier / Receiver |
| Number of Channels | 2 |
| Rated Power (per channel) | 300W at 4Ω, 200W at 8Ω |
| Input Sensitivity | 1.4Vrms (at 4Ω) |
| Frequency Response | 20Hz – 20kHz (±0.5dB) |
| Signal-to-Noise Ratio | >105dB (A-weighted) |
| Power Supply | 100-240V AC, 50/60Hz |
| Dimensions (W x H x D) | 19" x 3.5" x 15" (rackmount 2U) |
| Weight | Approx. 10.0 kg (22 lbs) |
| Network Connectivity | Ethernet (HiQnet) for remote control and monitoring |
| DSP Features | Built-in crossover, EQ, delay, and limiting |
| Input Connectors | Balanced XLR, Phoenix/Euroblock |
| Output Connectors | Speakon, binding posts |
| Cooling | Variable speed fans, front-to-rear airflow |
| Protection | Short circuit, thermal, DC, and overload protection |
| Safety Compliance | CE, FCC, UL |
| Maintenance | Clean with dry cloth; keep vents clear |
| Spare Parts / Repairability | Contact Crown technical support for spare parts |
| General Information | Designed for professional audio installations |
Frequently Asked Questions - DCi 2|300N CROWN
What is the power output of the Crown DCi 2|300N?
The DCi 2|300N delivers 300 watts per channel at 4 ohms, and 200 watts per channel at 8 ohms.
How do I connect the amplifier to my audio system?
Use balanced XLR or Phoenix connectors for input. Output connections can be made via Speakon or binding posts. Ensure proper polarity and impedance matching.
Can I control the amplifier remotely?
Yes, the DCi 2|300N supports HiQnet network control via Ethernet. Use Crown's Audio Architect software for remote monitoring and configuration.
What DSP functions are available?
The built-in DSP includes crossover, parametric EQ, delay, and output limiting. These can be configured via the network interface.
What are the power requirements?
The amplifier operates on 100-240V AC, 50/60Hz. It has a universal power supply with automatic voltage detection.
How do I clean and maintain the amplifier?
Use a soft, dry cloth to clean the exterior. Ensure ventilation grills are free from dust to prevent overheating.
What protection features does it have?
The amplifier includes short circuit, thermal, DC offset, and overload protection. If a fault occurs, the amplifier will shut down or limit output.
Can I bridge the two channels?
Yes, the DCi 2|300N can operate in bridged mono mode, delivering up to 600W at 8 ohms. Refer to the manual for wiring instructions.
Where can I find spare parts or get repairs?
Contact Crown technical support or an authorized service center. Use only genuine Crown parts for repairs.
What is the typical application for this amplifier?
The DCi 2|300N is designed for professional audio systems in installation, live sound, and commercial venues where reliable, high-quality amplification is required.
User questions about DCi 2|300N CROWN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual DCi 2|300N - CROWN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCi 2|300N by CROWN.
USER MANUAL DCi 2|300N CROWN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CROWN
Model : DCi 2|300N
Category : Receiver