MD-1002 - Processor AMX - Free user manual and instructions
Find the device manual for free MD-1002 AMX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | AMX |
| Model | MD-1002 |
| Product Type | Control Processor |
| Dimensions (H x W x D) | 1.75 x 17.0 x 8.0 inches (1U rackmount) |
| Weight | 5.5 lbs |
| Power Input | 100-240 VAC, 50/60 Hz |
| Power Consumption | 35 W maximum |
| Processor Speed | 800 MHz |
| Memory | 512 MB DDR3 |
| Flash Storage | 4 GB |
| Operating System | NetLinx |
| Communication Ports | 1 x Ethernet (RJ-45), 1 x RS-232, 1 x RS-485, 2 x IR ports |
| Number of Control Ports | 8 configurable I/O |
| Relay Outputs | 2 |
| Audio Output | 1 x stereo line out |
| Supported Protocols | TCP/IP, UDP, HTTP, Telnet, ICSP |
| Enclosure | Metal, rack-mountable with included brackets |
| Cooling | Fanless, passive cooling |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Humidity | 10% to 90% non-condensing |
| Certifications | CE, FCC Class A, RoHS |
| Included Accessories | Power cord, rack ears, RS-232 cable |
| Warranty | 3 years limited |
Frequently Asked Questions - MD-1002 AMX
How do I reset the MD-1002 to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds until the Status LED flashes rapidly. Release the button; the processor will reboot with factory settings.
What is the default IP address of the MD-1002?
The default IP address is 192.168.1.100 with subnet mask 255.255.255.0. You can change it via the web interface or NetLinx Studio.
How do I update the firmware on the MD-1002?
Download the latest firmware from the AMX website. Connect via Ethernet, then use NetLinx Studio or the web interface under 'Maintenance' > 'Firmware Update' to upload the file.
Can the MD-1002 control third-party devices?
Yes, it supports IR, RS-232, and TCP/IP control. Use the built-in driver database or create custom drivers via the NetLinx programming language.
Does the MD-1002 support PoE (Power over Ethernet)?
No, the MD-1002 requires a separate 12V DC or 100-240V AC power supply. PoE is not supported.
How many IR ports does the MD-1002 have?
The MD-1002 has 2 IR output ports for controlling devices like TVs and projectors. Each port can drive up to 5 meters of IR emitter cable.
What is the maximum number of devices the MD-1002 can control?
Although it varies by protocol, the MD-1002 can typically handle up to 100 controlled devices via Ethernet or serial, limited by system resources.
How do I connect to the MD-1002 for the first time?
Connect the MD-1002 to your network via Ethernet, set your PC to the same subnet (e.g., 192.168.1.x), and open a web browser to 192.168.1.100. Login with default credentials (admin/admin).
Can I use the MD-1002 in a multi-room system?
Yes, the MD-1002 supports ICSP (inter-control system protocol) to communicate with other AMX processors, allowing multi-room integration.
What is the replacement interval for the MD-1002's battery?
The MD-1002 has a CR2032 coin cell battery for real-time clock backup. Replace it every 5 years or when the time/date resets after power loss.
User questions about MD-1002 AMX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual MD-1002 - AMX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MD-1002 by AMX.
USER MANUAL MD-1002 AMX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AMX
Model : MD-1002
Category : Processor