LaserJet Enterprise M806dn - Printer HP - Free user manual and instructions
Find the device manual for free LaserJet Enterprise M806dn HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Monochrome laser printer |
| Print speed | Up to 55 ppm (A4) |
| Print resolution | 1200 x 1200 dpi |
| Duplex printing | Automatic |
| Paper capacity | Standard 600 sheets, max 4,400 sheets |
| Dimensions (W x D x H) | 17.2 x 20.1 x 18.9 inches (43.7 x 51.1 x 48.0 cm) |
| Weight | 74.1 lb (33.6 kg) |
| Power consumption | 890 W (printing), 22 W (standby), 0.6 W (off) |
| Connectivity | USB 2.0, Gigabit Ethernet |
| Mobile printing | HP ePrint, Apple AirPrint, Mopria |
| Security features | HP Sure Start, secure boot, TPM |
| Toner and drum | HP 26X high-yield toner cartridge (approx. 25,000 pages) |
| Maintenance | Replace toner, drum, and maintenance kit as needed |
| Recommended monthly page volume | 5,000 to 20,000 pages |
| Processor | 800 MHz |
| Memory | 1 GB (max 1.5 GB) |
| Supported operating systems | Windows, macOS, Linux |
| Warranty | 1-year limited hardware warranty |
Frequently Asked Questions - LaserJet Enterprise M806dn HP
How do I set up the HP LaserJet Enterprise M806dn for the first time?
Unpack the printer, install the toner cartridge and drum, load paper, connect power and network cable, and run the setup wizard on the control panel. Download the latest drivers from HP's website.
How do I clear a paper jam?
Open the top cover and paper trays, gently remove any jammed paper. Refer to the control panel for specific jam locations. Ensure no torn pieces remain before closing.
How do I replace the toner cartridge?
Open the front cover, remove the old toner by lifting the green handle, unpack the new cartridge, shake it gently, insert it until it clicks, and close the cover.
How do I connect the printer to a wireless network?
This model does not have built-in Wi-Fi. For wireless, connect via Ethernet to a wireless router or use a USB wireless print server.
How do I print from a mobile device?
Use HP ePrint by sending an email to the printer's email address, or use Apple AirPrint or Mopria from compatible apps.
How do I perform a factory reset?
Press 'Home' on the control panel, go to 'Administration' > 'General Settings' > 'Factory Defaults', and confirm. This restores all settings.
What does the 'Replace Toner' message mean?
The toner cartridge is empty or near empty. Replace it with an HP 26X (or 26A) cartridge to resume printing.
How do I clean the printer?
Use a soft, lint-free cloth slightly dampened with water. Gently wipe the exterior and paper feed rollers. Do not use solvents or get liquid inside.
How do I update the firmware?
Download the latest firmware from HP's support page, upload it via the embedded web server (EWS) or use the control panel's update option.
How do I check the printer's IP address?
Go to the control panel, press 'Home' > 'Administration' > 'Network Settings' > 'View Network Status', or print a configuration page.
User questions about LaserJet Enterprise M806dn HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual LaserJet Enterprise M806dn - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LaserJet Enterprise M806dn by HP.