6200-2 - Measuring equipment FLUKE - Free user manual and instructions
Find the device manual for free 6200-2 FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electrical Tester / Calibrator |
| Brand | Fluke |
| Model | 6200-2 |
| Dimensions (HxWxD) | Approximately 200 x 100 x 50 mm |
| Weight | Approximately 0.5 kg |
| Power Supply | Internal rechargeable battery or AC adapter |
| Key Functions | Voltage measurement, resistance measurement, current measurement, continuity test, diode test |
| Display | Digital LCD with backlight |
| Safety Rating | CAT III 600V, CAT IV 300V |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Wipe with a dry cloth; no solvents. Store in a cool, dry place. |
| Cleaning | Use a soft, damp cloth. Do not immerse in water. |
| Spare Parts & Repairability | Contact Fluke authorized service center for parts and repairs. |
| General Information | Includes test leads, carrying case, user manual. CE certified. |
Frequently Asked Questions - 6200-2 FLUKE
How do I measure voltage with the Fluke 6200-2?
Set the dial to the voltage range (V~ or V--). Insert the black lead into COM and red lead into VΩ. Touch the probes to the test points and read the display.
What is the maximum voltage the 6200-2 can measure?
The Fluke 6200-2 can measure up to 600V AC or DC depending on the setting. Always observe safety ratings.
How do I perform a continuity test?
Turn the dial to the continuity symbol (♫). Ensure power is off. Connect leads as usual. A beep indicates continuity if resistance is below ~30 Ω.
What type of battery does the 6200-2 use?
It uses a 9V alkaline battery (NEDA 1604, IEC 6LR61). Replace when the battery indicator shows low.
How do I replace the battery?
Turn off the meter, remove the screw on the battery compartment cover, lift the cover, replace the battery with a new 9V, and reattach the cover.
Is the Fluke 6200-2 overload protected?
Yes, it has overload protection up to 600V on all ranges. However, avoid exceeding the rated limits.
What is the accuracy of the 6200-2?
Accuracy varies by range. Typically ±(0.5% + 2 digits) for DC volts, ±(1.2% + 3 digits) for AC volts. Refer to the manual for specifics.
How do I clean the meter?
Use a damp cloth with mild soap and water. Do not use solvents or abrasives. Ensure the meter is dry before use.
What accessories are included?
The package includes the meter, test leads (black and red), a 9V battery (installed), a user manual, and a carrying case.
Where can I get service or repair?
Contact a Fluke authorized service center. Do not attempt to repair yourself as it may void the warranty.
User questions about 6200-2 FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual 6200-2 - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 6200-2 by FLUKE.
USER MANUAL 6200-2 FLUKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLUKE
Model : 6200-2
Category : Measuring equipment