K10LLCO - Smoke detector KIDDE - Free user manual and instructions
Find the device manual for free K10LLCO KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke and Carbon Monoxide Alarm |
| Brand | Kidde |
| Model | K10LLCO |
| Power Source | 10-year sealed lithium battery |
| Battery Life | 10 years (non-replaceable) |
| Sensor Type | Electrochemical (CO) and Photoelectric (Smoke) |
| Audible Alarm | 85 dB at 10 feet |
| Voice Alert | Yes ("Fire!" and "Warning: Carbon Monoxide!") |
| Dimensions | 4.7 x 1.8 inches (diameter x height) |
| Weight | 0.4 lbs (approx.) |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | Up to 95% non-condensing |
| Installation | Ceiling or wall mount, included mounting bracket |
| Test/Reset Button | Yes, for weekly testing |
| End-of-Life Warning | Chirps every 30 seconds after 10 years |
| Low Battery Warning | Chirps every 60 seconds |
| Interconnectable | No (standalone unit) |
| Certifications | UL 217 and UL 2034 listed |
| Warranty | Limited 10-year warranty |
| Included Accessories | Mounting bracket, screws, anchors, user manual |
Frequently Asked Questions - K10LLCO KIDDE
How do I install the K10LLCO smoke and CO alarm?
Choose a location on the ceiling or high on a wall. Use the included mounting bracket as a template to mark screw holes. Drill holes and insert anchors, then screw the bracket. Twist the alarm onto the bracket until it clicks. Pull the battery tab to activate the unit.
Can I replace the battery in the K10LLCO?
No, the battery is a sealed 10-year lithium battery and is not replaceable. When it reaches end of life, you must replace the entire alarm unit.
How often should I test the alarm?
Test the alarm weekly by pressing and holding the Test/Reset button until the alarm sounds (3 beeps for smoke, 4 beeps for CO). Release the button to stop.
What does a chirp every 30 seconds mean?
A chirp every 30 seconds indicates the alarm has reached its end of life (10 years). Replace the entire unit immediately.
What does a chirp every 60 seconds mean?
A chirp every 60 seconds indicates a low battery condition. For this sealed battery model, it actually means the battery is nearing end of life. Replace the alarm soon.
How do I silence a false alarm?
Press the Test/Reset button to silence the alarm for approximately 15 minutes. If it continues, ventilate the area and ensure no smoke or CO source is present.
What should I do if the alarm sounds for carbon monoxide?
Immediately evacuate everyone to fresh air and call 911. Do not re-enter the premises until cleared by emergency personnel. The alarm pattern for CO is 4 beeps followed by voice warning 'Warning: Carbon Monoxide!'.
Can the K10LLCO be interconnected with other alarms?
No, this model is a standalone unit and cannot be interconnected with other detectors.
How do I clean the alarm?
Use a soft brush or vacuum cleaner with a soft brush attachment to gently clean the vents on the alarm once a month. Do not use water, cleaners, or solvents.
What is the lifespan of the K10LLCO?
The alarm has a 10-year lifespan from the date of manufacture (or activation). The unit will chirp every 30 seconds at end of life, indicating it should be replaced immediately.
User questions about K10LLCO KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual K10LLCO - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. K10LLCO by KIDDE.
USER MANUAL K10LLCO KIDDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KIDDE
Model : K10LLCO
Category : Smoke detector