NKB1000 - Keyboard Dahua Technology - Free user manual and instructions
Find the device manual for free NKB1000 Dahua Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Keyboard for PTZ Camera Control |
| Brand | Dahua Technology |
| Model | NKB1000 |
| Dimensions (L x W x H) | Approx. 380 x 160 x 50 mm |
| Weight | Approx. 1.2 kg |
| Power Supply | DC 12V / 1A (via included adapter) or PoE (802.3af) |
| Display | 3.2-inch TFT LCD with joystick and function keys |
| Joystick | 3-axis analog joystick for precise PTZ control |
| Keypad | Dedicated numeric keypad and function keys for camera selection and presets |
| Network Interface | RJ45 10/100 Mbps Ethernet port |
| Protocols Supported | Pelco-D, Pelco-P, Dahua, and other major PTZ protocols |
| Max Cameras Controlled | Up to 255 cameras (configurable via network) |
| Preset Positions | Up to 255 presets per camera |
| Operating Temperature | -10°C to 55°C (14°F to 131°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Material | ABS plastic with rubber non-slip base |
| Cleaning Instructions | Wipe with a soft, dry cloth; avoid liquids and abrasive cleaners |
| Safety Precautions | Use only supplied power adapter; do not expose to moisture; disconnect during storms |
| Spare Parts / Repair | Contact Dahua authorized service center for repairs; no user-serviceable parts inside |
| Mounting | Desktop use with rubber feet; optional VESA mount (not included) |
Frequently Asked Questions - NKB1000 Dahua Technology
How do I connect the NKB1000 keyboard to my DVR/NVR?
Connect the keyboard to the same network as your DVR/NVR using an Ethernet cable. Ensure both devices are on the same IP subnet. Then configure the keyboard's IP settings via the LCD menu.
What is the default IP address of the NKB1000?
The default IP address is 192.168.1.108 with subnet mask 255.255.255.0. You can change it in the network settings.
How do I calibrate the joystick?
Enter the keyboard's menu (press 'Menu' key), navigate to 'Joystick Calibration', and follow the on-screen instructions to center and move the joystick to its limits.
Can I control multiple cameras with one keyboard?
Yes, the NKB1000 can control up to 255 cameras by switching between them using the numeric keypad or the 'Camera' key.
What PTZ protocols does the NKB1000 support?
It supports Pelco-D, Pelco-P, Dahua, and several other protocols. Select the correct protocol in the keyboard's settings for your camera.
How do I set a preset position?
Move the camera to the desired position using the joystick, then press and hold the 'Preset' key and enter a preset number (e.g., 01) using the numeric keypad.
My keyboard shows 'Network Disconnected'. What should I do?
Check the Ethernet cable connection and ensure the network switch is powered on. Verify the IP settings on the keyboard match your network (DHCP or static). Try rebooting the keyboard.
Can I use the NKB1000 with analog cameras?
The NKB1000 is a network keyboard and works only with IP cameras or DVRs/NVRs that support network PTZ control. It cannot directly control analog cameras.
How do I update the firmware on the keyboard?
Download the latest firmware from the Dahua website. Save it to a USB flash drive (FAT32), insert it into the keyboard's USB port, and go to 'System > Firmware Update' in the menu.
What do I do if the keyboard is unresponsive?
Try a hard reset: press and hold the 'Reset' button on the back for 10 seconds using a paper clip. This will restore factory defaults. Reload settings if needed.
User questions about NKB1000 Dahua Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Keyboard in PDF format for free! Find your manual NKB1000 - Dahua Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NKB1000 by Dahua Technology.