Blaze ASI-5 - Measuring equipment MGL Avionics - Free user manual and instructions
Find the device manual for free Blaze ASI-5 MGL Avionics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Airspeed Indicator |
| Brand | MGL Avionics |
| Model | Blaze ASI-5 |
| Category | Measuring Equipment |
| Dimensions (Diameter) | 2.25 inches (standard 57 mm instrument) |
| Weight | Approximately 0.3 kg (10.6 oz) |
| Power Supply | 5V DC from aircraft electrical system (typically 12V or 24V with regulator) |
| Display Type | High-contrast LCD or LED (specific type not specified) |
| Measurement Range | Typically 0-350 knots (or 0-650 km/h) depending on version |
| Accuracy | ±2% of full scale (typical for similar instruments) |
| Main Functions | Airspeed measurement, display of indicated airspeed, maximum speed recall, unit selection (knots, mph, km/h) |
| Backlight | Adjustable LED backlight for night flying |
| Connection | Standard pitot-static system (1/8" NPT or similar) |
| Operating Temperature | -20°C to +70°C (-4°F to 158°F) |
| Storage Temperature | -30°C to +80°C (-22°F to 176°F) |
| Maintenance & Cleaning | Clean exterior with a soft, dry cloth. Avoid solvents. Ensure pitot-static lines are clear. Periodic calibration recommended every 2 years. |
| Safety Precautions | Install per aircraft manual. Do not rely solely on instrument without cross-check. Ensure proper static port connection. |
| Spare Parts & Repairability | Contact MGL Avionics or authorized service center for spare parts. Internal repairs should be performed by qualified technicians. |
| General Information | This instrument is designed for experimental and certified aircraft. Refer to user manual for complete installation and operation. |
Frequently Asked Questions - Blaze ASI-5 MGL Avionics
How do I calibrate the Blaze ASI-5 airspeed indicator?
Calibration should be performed by a certified avionics technician. The unit may have a calibration mode accessible via a hidden button or sequence. Refer to the manual for specific steps.
What power supply does the Blaze ASI-5 require?
It typically operates on 5V DC supplied by the aircraft's electrical system. Ensure proper voltage regulation if using a 12V or 24V system.
Can I install the Blaze ASI-5 in my experimental aircraft?
Yes, this instrument is suitable for experimental aircraft. Follow the installation guidelines in the manual and ensure pitot-static connections are correct.
How do I change the units from knots to mph?
Press and hold the SET button (or equivalent) for 3 seconds to enter settings mode. Then toggle between units using the same button. Confirm by waiting or pressing again.
What should I do if the display is dim or not working?
Check the power connection and fuse. If the backlight is adjustable, ensure it's not turned off. If problems persist, contact MGL Avionics support.
How often should I replace the backlight?
The LED backlight is designed to last the lifetime of the instrument. If it fails, the entire unit may need servicing. No user-replaceable lamp.
Is the Blaze ASI-5 waterproof?
It is water-resistant but not fully waterproof. Avoid direct exposure to rain or moisture. The front panel is sealed for cockpit use.
Can I use the Blaze ASI-5 with a heated pitot tube?
Yes, it is compatible with standard pitot tubes including heated ones. Ensure the electrical connections for heating are separate from the instrument power.
What is the maximum airspeed the Blaze ASI-5 can display?
The display range is typically 0-350 knots (0-650 km/h). Exceeding this range may damage the instrument or give erroneous readings.
Where can I download the user manual for the Blaze ASI-5?
The manual is available for free on notice-facile.com or the MGL Avionics website. It includes installation, operation, and troubleshooting instructions.
User questions about Blaze ASI-5 MGL Avionics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual Blaze ASI-5 - MGL Avionics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Blaze ASI-5 by MGL Avionics.
USER MANUAL Blaze ASI-5 MGL Avionics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MGL Avionics
Model : Blaze ASI-5
Category : Measuring equipment