ECH93BL - Basket CDA - Free user manual and instructions
Find the device manual for free ECH93BL CDA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Chimney Hood |
| Brand | CDA |
| Model | ECH93BL |
| Width | 90 cm |
| Depth | 50 cm |
| Height (min-max) | 60-110 cm |
| Weight | 15 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Motor Power | 200 W |
| Maximum Extraction Rate | 620 m³/h |
| Noise Level (max) | 65 dB(A) |
| Grease Filter Type | Aluminium mesh, washable |
| Charcoal Filter (optional) | Yes, for recirculation mode |
| Lighting | 2 x 1.5 W LED |
| Controls | Electronic push buttons with 3 speeds |
| Duct Diameter | 150 mm |
| Energy Class | A+ |
| Installation Type | Wall-mounted or ducted |
| Cleaning | Clean grease filters monthly with warm soapy water |
| Replacement Parts | Filters and LED lamps available from CDA |
Frequently Asked Questions - ECH93BL CDA
How do I install the CDA ECH93BL hood?
Installation should be carried out by a qualified professional. Ensure the hood is mounted at the recommended height (65-75 cm above gas hob, 55-65 cm above electric hob). Use the provided template for fixing and connect the ducting for extraction mode or insert charcoal filters for recirculation.
How often should I clean the grease filters?
Clean the aluminium mesh filters every month or more frequently if used heavily. Soak them in warm soapy water, rinse, and dry thoroughly before refitting. Do not use abrasive cleaners.
Can I use the hood in recirculation mode?
Yes, you need to purchase and install charcoal filters (sold separately). The hood will then filter and recirculate air back into the room.
What are the dimensions of the ECH93BL?
The hood is 90 cm wide, 50 cm deep, and the chimney can be adjusted from 60 cm to 110 cm in height.
How do I replace the LED lights?
Disconnect the hood from power. Remove the lamp cover by prying gently. Replace the LED module with a compatible CDA part (1.5 W). Reattach the cover and restore power.
What does the error code E2 mean?
Error E2 usually indicates a motor or sensor fault. Reset the hood by turning off the power for 5 minutes. If the error persists, contact CDA service.
Is the hood suitable for use over a gas hob?
Yes, it is designed for use above gas hobs. Ensure the minimum distance of 65 cm between the hob and the bottom of the hood.
How do I adjust the fan speed?
Use the control buttons: typically speed 1 (low), speed 2 (medium), speed 3 (high). Some models have a boost function for maximum extraction.
Can I get replacement filters for the ECH93BL?
Yes, CDA stocks replacement aluminium grease filters and charcoal filters. Refer to the product code in your manual or contact CDA support.
Why is the hood not extracting properly?
Check if the grease filters are clogged and clean them. Ensure the ductwork is not blocked or kinked. If using recirculation, replace the charcoal filter. Also verify that the motor is running at the selected speed.
User questions about ECH93BL CDA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual ECH93BL - CDA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ECH93BL by CDA.
USER MANUAL ECH93BL CDA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CDA
Model : ECH93BL
Category : Basket