DSX 115 M - Speaker The Box Pro - Free user manual and instructions
Find the device manual for free DSX 115 M The Box Pro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive PA Speaker |
| Model | DSX 115 M |
| Brand | The Box Pro |
| Woofer Size | 15 inches |
| Frequency Response | 45 Hz - 20 kHz |
| Power Handling (RMS) | 500 W |
| Power Handling (Peak) | 1000 W |
| Impedance | 8 ohms |
| Sensitivity | 97 dB @ 1W/1m |
| Maximum SPL | 126 dB |
| Connectors | 2x Speakon NL4 |
| Dimensions (HxWxD) | 700 x 450 x 400 mm |
| Weight | 22 kg |
| Enclosure Material | Plywood with polyurea coating |
| Grille | Steel with acoustic foam |
| Mounting Options | Pole mount (35 mm), flying points |
| Protection Features | Overload protection via limiter |
| Maintenance | Clean with dry cloth; do not use solvents |
| Safety Precautions | Avoid moisture; use stable surface; professional installation recommended |
| Spare Parts Availability | Diaphragm, grille, connectors available from The Box Pro |
| Warranty | 2 years (excluding wear parts) |
Frequently Asked Questions - DSX 115 M The Box Pro
How do I connect the DSX 115 M to an amplifier?
Use a Speakon NL4 cable to connect the amplifier's output to the speaker's input. Ensure the amplifier is turned off during connection and set to the correct impedance (8 ohms).
What is the maximum power handling of this speaker?
The DSX 115 M handles 500 W RMS and 1000 W peak. It is recommended to use an amplifier with a similar power rating to avoid damage.
Can I use this speaker outdoors?
Yes, but protect it from direct rain or moisture. The enclosure is durable but not waterproof. Use a cover or place it under shelter.
How should I clean the speaker?
Wipe the enclosure with a dry soft cloth. For the grille, use a vacuum with a brush attachment. Avoid solvents or water inside the speaker.
Why is there no sound from the speaker?
Check the amplifier connection, ensure the Speakon cable is fully inserted, and verify the amplifier is powered on and not in protection mode. Also, test with another cable or channel.
What is the best way to mount this speaker?
Use a 35 mm pole mount for tripod stands, or use the integrated flying points with appropriate rigging hardware for suspended installation. Always follow safety guidelines.
Can I use it as a floor monitor?
Yes, the DSX 115 M can be used as a wedge monitor. Place it on the floor with the speaker angled correctly. No special setup required.
How do I replace the diaphragm?
Remove the grille, unscrew the old diaphragm, disconnect and reconnect the leads of the new diaphragm, and reassemble. Ensure correct alignment and torque.
What amplifier power is recommended?
An amplifier delivering 500 to 800 W RMS per channel at 8 ohms is ideal. Avoid overpowering, which can damage the speaker.
Does this speaker have a built-in crossover?
Yes, it includes a passive crossover that splits the signal between the woofer and tweeter. No external crossover is required.
User questions about DSX 115 M The Box Pro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual DSX 115 M - The Box Pro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSX 115 M by The Box Pro.
USER MANUAL DSX 115 M The Box Pro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : The Box Pro
Model : DSX 115 M
Category : Speaker