EKI-7706G-2F-AE - Switch Advantech - Free user manual and instructions
Find the device manual for free EKI-7706G-2F-AE Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Managed Switch |
| Model | EKI-7706G-2F-AE |
| Ports | 6x 10/100/1000Base-T (RJ45) + 2x 100/1000Base-X SFP |
| Switching Capacity | 16 Gbps |
| MAC Address Table | 8K entries |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, RMON |
| Layer 2 Features | VLAN, STP/RSTP/MSTP, Link Aggregation, IGMP Snooping, Port Security |
| Power Input | 12-48 VDC (redundant dual power input) |
| Power Consumption | 10.5 W (max) |
| Dimensions (W x D x H) | 50 x 96 x 140 mm (1.97 x 3.78 x 5.51 in) |
| Weight | 0.75 kg (1.65 lb) |
| Mounting | DIN-rail mount (kit included) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Protection Class | IP30 (metal enclosure) |
| EMC Standards | FCC Class A, CE |
| Safety Standards | UL 60950-1, EN 62368-1 |
| Care and Cleaning | Clean with a dry cloth; do not use liquid or aerosol cleaners |
| Spare Parts and Repairability | Power supply unit available; contact Advantech support for spare parts |
| General Information | Warranty: 5 years; designed for harsh industrial environments |
Frequently Asked Questions - EKI-7706G-2F-AE Advantech
How do I perform a factory reset on the EKI-7706G-2F-AE?
Press and hold the reset button on the front panel for 5-10 seconds until the system LED blinks rapidly. This will restore factory default settings.
Can I use standard RJ45 copper ports for PoE?
No, the EKI-7706G-2F-AE does not support Power over Ethernet (PoE). All copper ports are data-only.
What SFP modules are compatible with the fiber ports?
The switch supports standard 100/1000Base-X SFP modules, including multimode and single-mode. Use Advantech recommended modules for best compatibility.
How to configure VLANs on this switch?
Access the web GUI via the default IP (192.168.1.1), go to VLAN configuration, create VLAN groups, and assign ports accordingly. Port-based and IEEE 802.1Q tagging are supported.
Does the switch support ring redundancy (e.g., ERPS or STP)?
Yes, it supports STP/RSTP/MSTP and also features proprietary X-Ring technology for fast recovery (less than 20 ms).
What is the default username and password for login?
Default username is admin and password is admin. It is strongly recommended to change the password after first login.
How to update the firmware?
Download the latest firmware from Advantech support website, then upload it via the web GUI under System Maintenance > Firmware Upgrade. Do not power off during upgrade.
Can the switch operate on DC power? What voltage range?
Yes, it accepts 12-48 VDC via the terminal block. Dual redundant inputs allow backup power supply.
What is the maximum cable length for copper ports?
For 10/100/1000Base-T, the maximum distance is 100 meters (328 feet) using Cat5e or better cable.
How to troubleshoot no link on fiber ports?
Check that the SFP module is firmly inserted, verify fiber cable type (single-mode vs multimode), clean connectors, and ensure matching speed/duplex settings on both ends.
User questions about EKI-7706G-2F-AE Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual EKI-7706G-2F-AE - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKI-7706G-2F-AE by Advantech.
USER MANUAL EKI-7706G-2F-AE Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : EKI-7706G-2F-AE
Category : Switch