HAGER

BKFD200145 - Underfloor heating HAGER - Free user manual and instructions

Find the device manual for free BKFD200145 HAGER in PDF.

📄 61 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice HAGER BKFD200145 - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Underfloor Heating Controller
Brand Hager
Model BKFD200145
Dimensions 86 x 86 x 35 mm
Weight 0.2 kg
Power Supply 230 V AC, 50 Hz
Maximum Load 16 A
Display Type LCD with backlight
Temperature Range 5°C to 40°C
Control Type Programmable thermostat
Sensor Types Floor sensor, room sensor
Programming 7-day programmable, 4 time periods per day
Protection Class IP20
Installation Flush-mounting or surface-mounting
Maintenance Wipe with a dry, soft cloth
Safety Features Child lock, frost protection
Spare Parts Available through Hager authorized distributors
Warranty 2 years

Frequently Asked Questions - BKFD200145 HAGER

How do I install the Hager BKFD200145 underfloor heating controller?
Installation should be performed by a qualified electrician. The controller can be flush-mounted or surface-mounted. Connect the power supply (230 V AC), the heating load, and the floor sensor according to the wiring diagram in the manual. Ensure the device is mounted at a suitable height and away from direct heat sources.
Can the BKFD200145 be used with both electric and water-based underfloor heating?
The BKFD200145 is designed primarily for electric underfloor heating systems. For water-based systems, it may control a zone valve or pump if configured accordingly. Verify compatibility with your specific heating system in the manual.
How do I program the heating schedule?
Press the 'P' button to enter programming mode. You can set up to 4 time periods per day (Morning, Day, Evening, Night) for each day of the week. Use the arrow keys to adjust temperature and time settings. Confirm with the 'OK' button.
What does the floor sensor do and is it mandatory?
The floor sensor measures the actual floor temperature to prevent overheating and improve comfort. It is strongly recommended for electric systems to protect the floor covering. For room-only control, the sensor can be disabled in the settings.
How do I reset the controller to factory settings?
Navigate to the settings menu (hold 'Menu' button for 3 seconds), select 'Factory Reset', and confirm. The device will restore original factory settings, erasing all custom programs.
Why is the display showing an error code?
Common error codes: E1 (sensor fault), E2 (short circuit), E3 (overload). Check sensor connections and load current. If the problem persists, consult the manual or contact Hager support.
Can the BKFD200145 be connected to a smart home system?
The BKFD200145 is a standalone thermostat and does not have native smart home integration. However, it can be used with external relays or controllers if necessary. Check for future Hager modules or gateways.
What is the maximum load capacity of the BKFD200145?
The thermostat can handle a maximum load of 16 A (approx. 3,680 W at 230 V). Ensure your heating system's total current does not exceed this limit to avoid damage.
How do I clean and maintain the thermostat?
Disconnect power before cleaning. Wipe the surface with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners. Regularly check sensor wiring for damage.
Where can I find spare parts or a replacement?
Spare parts (sensors, mounting frames) are available through Hager authorized distributors. For a replacement unit, refer to the same channels or contact Hager customer service.

User questions about BKFD200145 HAGER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Underfloor heating in PDF format for free! Find your manual BKFD200145 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BKFD200145 by HAGER.

USER MANUAL BKFD200145 HAGER

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : HAGER

Model : BKFD200145

Category : Underfloor heating