MLX - Uncategorized Martin Audio - Free user manual and instructions
Find the device manual for free MLX Martin Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | High-performance subwoofer |
| Frequency Response | 32 Hz - 150 Hz ±3 dB |
| Maximum SPL | 135 dB peak |
| Power Handling (AES) | 1000 W continuous, 4000 W peak |
| Low Frequency Driver | 18" (460mm) neodymium magnet |
| Impedance | 8 ohms |
| Dimensions (W x H x D) | 650 x 550 x 600 mm |
| Weight | 45 kg (99 lbs) |
| Power Supply | Passive (no amplifier built-in) |
| Enclosure Type | Vented (bass reflex) |
| Construction Material | Baltic birch plywood with durable coating |
| Connectors | 2x Neutrik speakON NL4 |
| Rigging Points | 4x M10 threaded inserts |
| Grille | Hex punched steel with acoustic cloth |
| Recommended Processing | External DSP crossover required |
| Intended Use | Professional sound reinforcement, touring, installation |
| Compliance | CE, RoHS |
Frequently Asked Questions - MLX Martin Audio
How do I connect the MLX subwoofer to an amplifier?
Use Neutrik speakON NL4 cables. Connect the amplifier output to the MLX input connector. Ensure correct polarity (pin 1+ and 1- typically). The MLX is a passive subwoofer, so an external amplifier with appropriate power and crossover is required.
What is the recommended crossover frequency for the MLX?
A typical crossover frequency for the MLX is around 80-100 Hz when used with full-range speakers. Use a Digital Signal Processor (DSP) to set a high-pass filter for the tops and a low-pass filter for the sub. Always consult the system design guidelines.
Can I use the MLX outdoors?
Yes, the MLX is designed for professional use including outdoor events. However, it is not weatherproof. Protect it from direct rain and moisture. Use a cover when not in use and avoid exposure to extreme conditions.
How do I clean and maintain the MLX subwoofer?
Use a dry cloth to clean the enclosure. Do not use solvents or abrasive cleaners. Periodically check the grille for debris. Ensure the air vents are unobstructed. Store in a dry environment when not in use.
What amplifier power do I need for the MLX?
The MLX handles 1000 W continuous (AES) and 4000 W peak. Use an amplifier that delivers between 1000 W and 2000 W into 8 ohms for optimal performance. Ensure the amplifier is stable at the subwoofer's impedance.
Is the MLX compatible with Martin Audio's own processors?
Yes, Martin Audio recommends using their DX series processors or other DSP units with preset configurations for the MLX to achieve optimal performance and protection.
Where can I find the user manual for the MLX?
The user manual is available for free download at notice-facile.com in PDF format. It contains detailed specifications, setup instructions, and safety information.
What type of enclosure does the MLX use?
The MLX uses a vented (bass reflex) enclosure design to enhance low-frequency output and efficiency.
How long is the warranty on the MLX?
Martin Audio typically offers a 5-year warranty on passive loudspeakers. Check with your local dealer for specific terms and conditions.
Can I fly or stack multiple MLX subwoofers?
Yes, the MLX has M10 rigging points for flying and can be stacked. Always follow safety guidelines and use appropriate hardware. Do not exceed the maximum load per rigging point.
User questions about MLX Martin Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MLX - Martin Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MLX by Martin Audio.
USER MANUAL MLX Martin Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Martin Audio
Model : MLX
Category : Uncategorized