202 G1 - Desktop computer HP - Free user manual and instructions
Find the device manual for free 202 G1 HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Desktop Computer |
| Brand | HP |
| Model | 202 G1 |
| Processor | Intel Core i5-4570 (3.2 GHz) or equivalent |
| RAM | 4 GB DDR3 (expandable to 16 GB) |
| Storage | 500 GB SATA HDD (7200 RPM) |
| Graphics | Integrated Intel HD Graphics 4600 |
| Operating System | Windows 8.1 Pro (upgradable to Windows 10) |
| Dimensions (W x D x H) | 33.0 x 27.0 x 10.5 cm |
| Weight | Approximately 5.5 kg |
| Power Supply | 180 W internal power supply (active PFC) |
| Front Ports | 2x USB 2.0, 1x Headphone, 1x Microphone |
| Rear Ports | 4x USB 3.0, 1x VGA, 1x DisplayPort, 1x RJ-45, 1x Line-in, 1x Line-out |
| Main Functions | Office productivity, web browsing, multimedia playback, light content creation |
| Maintenance & Cleaning | Use a soft, dry cloth to clean exterior; ensure vents are dust-free for proper airflow |
| Safety Instructions | Use a grounded power outlet; do not place near liquids or in confined spaces |
| Spare Parts Availability | RAM, HDD/SSD, power supply, cooling fan, CMOS battery |
| Repairability | Easy to open case with tool-less access to internal components |
| General Information | Designed for business environments; supports up to three displays via optional graphics card |
Frequently Asked Questions - 202 G1 HP
How do I connect to Wi-Fi on my HP 202 G1?
Ensure you have a Wi-Fi adapter installed (if not built-in). Go to Settings > Network & Internet > Wi-Fi, turn on Wi-Fi, select your network, and enter the password.
Can I upgrade the RAM in the HP 202 G1?
Yes, the HP 202 G1 has two DDR3 SO-DIMM slots supporting up to 16 GB. Open the case, locate the memory slots, and replace or add modules.
How do I replace the hard drive?
Power off, disconnect cables, open the side panel, remove the drive cage screws, slide out the old 3.5-inch SATA HDD, and install a new one. Reconnect cables and close the case.
How do I perform a factory reset?
Restart the computer and press F11 repeatedly during boot to enter the recovery environment. Choose Troubleshoot > Reset this PC and follow the prompts.
Does the HP 202 G1 support dual monitors?
Yes, it has a VGA and a DisplayPort. Connect two monitors using these ports. For three monitors, add a discrete graphics card.
How do I clean the inside of my HP 202 G1?
Power off and unplug. Open the case, use compressed air to blow dust from fans, heat sink, and components. Avoid touching internal parts.
What should I do if the computer won't power on?
Check power connections, ensure the power supply switch is on (if present), test with a different outlet. If still off, the power supply may be faulty.
How do I update drivers?
Visit HP Support website, enter your model '202 G1', download and install the latest drivers for chipset, graphics, audio, etc. Alternatively, use Windows Update.
Can I install Windows 10 on this computer?
Yes, the HP 202 G1 is compatible with Windows 10. Download the Media Creation Tool, create a bootable USB, and install. Ensure drivers are updated after installation.
How do I access the BIOS setup?
Restart the computer and press F10 repeatedly during boot. In BIOS, you can change boot order, enable virtualization, and configure hardware settings.
User questions about 202 G1 HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Desktop computer in PDF format for free! Find your manual 202 G1 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 202 G1 by HP.
USER MANUAL 202 G1 HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : 202 G1
Category : Desktop computer