TruVision TVW-5303 - Surveillance Camera Interlogix - Free user manual and instructions
Find the device manual for free TruVision TVW-5303 Interlogix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Brand | Interlogix |
| Model | TruVision TVW-5303 |
| Category | IP Security Camera |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Max Resolution | 1920 x 1080 (Full HD 1080p) |
| Lens Type | Fixed / Varifocal (2.8-12mm) |
| IR Range | Up to 30 meters (with Smart IR) |
| Day/Night | ICR (Infrared Cut Filter) for true day/night |
| Video Compression | H.264 / H.265 |
| Power Supply | 12V DC or PoE (802.3af) |
| Power Consumption | Max 8W (without IR); 12W (with IR) |
| Dimensions (W x H x D) | Approx. 70 x 65 x 150 mm (without bracket) |
| Weight | Approx. 500 g (net) |
| Operating Temperature | -30°C to +60°C |
| Ingress Protection | IP66 (weatherproof) |
| Mounting | Wall / Ceiling bracket included |
| Audio Support | Built-in mic (optional external speaker) |
| Alarm I/O | 1 input / 1 output |
| Warranty | 3 years limited |
Frequently Asked Questions - TruVision TVW-5303 Interlogix
How do I reset the camera to factory defaults?
Press and hold the reset button (located near the Ethernet port) for about 10 seconds until the camera reboots. The camera will revert to default IP 192.168.1.10 and login credentials (admin/1234).
Does the TVW-5303 support PoE?
Yes, it supports PoE (IEEE 802.3af). If you don't have a PoE switch, you can use a power adapter (12V DC) included in the box.
What is the default IP address?
The default IP is 192.168.1.10. You can find it using the Interlogix Discovery Tool or check your router's DHCP client list.
Can I view the camera remotely?
Yes, after configuring port forwarding on your router you can access via web browser or the Interlogix mobile app (TruVision Navigator). Ensure UPnP is enabled for easier setup.
Does it support motion detection?
Yes, the camera has built-in motion detection. You can set up zones and sensitivity via the web interface. Alerts can be sent via email or FTP.
Can I use an SD card for local recording?
Yes, there is a microSD slot (up to 128 GB). Insert card before powering up. Recordings can be set to continuous or motion-triggered.
How do I clean the camera lens?
Use a soft, lint-free cloth slightly dampened with water or lens cleaning solution. Never use abrasive cleaners. Clean the housing with mild soap and water. Do not spray liquids directly onto the camera.
Is the camera suitable for outdoor use?
Yes, it has an IP66 rating meaning it is dust-tight and protected against heavy rain. However, avoid direct exposure to strong water jets.
What software is compatible with this camera?
It works with the Interlogix TruVision Navigator software (free) and third-party VMS supporting ONVIF Profile S. Several NVRs from Interlogix are also compatible.
How do I update the firmware?
Download the latest firmware from the Interlogix website. In the camera web interface, go to Maintenance > Upgrade, select the file, and click Upgrade. Do not power off during the process.
User questions about TruVision TVW-5303 Interlogix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual TruVision TVW-5303 - Interlogix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TruVision TVW-5303 by Interlogix.