DS-K2601-G - Security System Hikvision - Free user manual and instructions
Find the device manual for free DS-K2601-G Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control Controller |
| Brand | Hikvision |
| Model | DS-K2601-G |
| Dimensions (W x H x D) | 192 x 120 x 36 mm |
| Weight | 0.5 kg |
| Power Supply | 12 VDC, 1A |
| Power Consumption | ≤ 5W |
| Communication | TCP/IP, RS-485 |
| Card Reader Support | Wiegand 26/34 |
| Door Lock Control | Relay output, max 2A/24VDC |
| Tamper Detection | Tamper switch |
| Operating Temperature | -10°C to 55°C (14°F to 131°F) |
| Operating Humidity | 10% to 90% (non-condensing) |
| Enclosure Material | Metal casing |
| Mounting | Wall mount (screws included) |
| User Capacity | Up to 10,000 card users |
| Event Log | Up to 100,000 events |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety Features | Surge protection, tamper alarm |
| Spare Parts / Repairability | Not user-serviceable; contact support |
| General Information | Professional access controller for single door |
Frequently Asked Questions - DS-K2601-G Hikvision
How do I reset the DS-K2601-G to factory defaults?
Press and hold the reset button (inside the unit) for 10 seconds while power is on. The device will reboot and load factory settings. Note: All configurations will be erased.
What power supply is required for the DS-K2601-G?
The controller requires a 12 VDC power supply with at least 1A capacity. Use a regulated power source to avoid damage.
Can the DS-K2601-G work with Wi-Fi?
No, the DS-K2601-G does not have built-in Wi-Fi. It connects via Ethernet (TCP/IP) or RS-485. You can use a Wi-Fi bridge if wireless is needed.
How many users can the DS-K2601-G support?
It supports up to 10,000 card users and stores 100,000 event logs.
What types of card readers are compatible?
It supports Wiegand 26-bit and 34-bit readers. Common models include Hikvision DS-K1100 series or third-party readers with Wiegand output.
How do I wire the door lock?
Connect the lock to the relay output terminals (NO/COM/NC). Ensure the lock voltage and current do not exceed 2A/24VDC. Use a diode for inductive loads.
Can the DS-K2601-G be used with a biometric reader?
Yes, as long as the biometric reader outputs Wiegand 26/34. Some readers may require additional power or configuration.
What should I do if the device does not power on?
Check the power supply voltage (12VDC) and ensure proper polarity. Verify the power adapter is functional. If using PoE (if supported), check the Ethernet cable.
How do I configure the controller?
Use the Hikvision iVMS-4200 software or access the device web interface via its IP address. Default username is 'admin' and password is '12345' (change immediately).
Is the DS-K2601-G weatherproof?
No, it is designed for indoor use only. Install in a dry location with temperature between -10°C and 55°C. Outdoor use requires an external enclosure.
User questions about DS-K2601-G Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security System in PDF format for free! Find your manual DS-K2601-G - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K2601-G by Hikvision.
USER MANUAL DS-K2601-G Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-K2601-G
Category : Security System