Concorde Mix MKII - Uncategorized ORTOFON - Free user manual and instructions
Find the device manual for free Concorde Mix MKII ORTOFON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Phono Cartridge |
| Brand | Ortofon |
| Model | Concorde Mix MKII |
| Type | Moving Magnet (MM) |
| Stylus Shape | Spherical |
| Output Voltage | 6 mV (1 kHz, 5 cm/sec) |
| Channel Balance | < 1.5 dB |
| Channel Separation | > 20 dB (1 kHz) |
| Frequency Response | 20 Hz – 20 kHz ± 2 dB |
| Tracking Force Range | 3.0 – 4.5 g |
| Recommended Tracking Force | 3.5 g |
| Stylus Tip Radius | 0.7 mil |
| Recommended Load Impedance | 47 kOhms |
| Cartridge Weight | 17.5 g |
| Replacement Stylus | Ortofon Concorde Mix MKII Stylus |
| Mounting Type | Half-inch (Standard) / Concorde integrated headshell |
| Intended Use | DJ / High-tracking performance |
| Cartridge Color | Black |
| Compatible Turntables | Any with standard mount or Concorde headshell |
Frequently Asked Questions - Concorde Mix MKII ORTOFON
What is the Ortofon Concorde Mix MKII cartridge used for?
The Ortofon Concorde Mix MKII is designed for DJ use, offering high tracking force and durability for scratching and mixing.
How do I install the Concorde Mix MKII cartridge?
The cartridge comes as an integrated headshell (Concorde type). Simply align the headshell slots with the tonearm and tighten the securing nut.
What tracking force should I use?
Ortofon recommends a tracking force of 3.5 g, with a safe range of 3.0 to 4.5 g. Adjust using the counterweight on your turntable.
How do I clean the stylus?
Use a stylus cleaning brush or a dry, soft brush. Gently brush from back to front. Avoid using liquids unless specifically designed for stylus cleaning.
Can I replace the stylus on this cartridge?
Yes, the stylus is user-replaceable. The replacement model is the Ortofon Concorde Mix MKII Stylus.
Is this cartridge compatible with any turntable?
The Concorde Mix MKII fits turntables with a half-inch mount or a Concorde headshell. Most DJ turntables (Technics SL-1200, etc.) are compatible.
What is the output voltage of the Concorde Mix MKII?
The output voltage is 6 mV at 1 kHz (5 cm/sec). This is suitable for standard phono preamps.
How do I align the cartridge?
Since it's an integrated headshell, alignment is simplified. Use a protractor to ensure the stylus tip aligns with the recommended overhang and offset angle.
What is the recommended load impedance?
The Ortofon Concorde Mix MKII works best with a 47 kOhm load impedance, which is standard for MM cartridges.
How often should I replace the stylus?
Stylus lifespan depends on usage. For regular DJ use, replace after approximately 500-1000 hours of playback, or sooner if you notice distortion or wear.
User questions about Concorde Mix MKII ORTOFON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Concorde Mix MKII - ORTOFON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Concorde Mix MKII by ORTOFON.
USER MANUAL Concorde Mix MKII ORTOFON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ORTOFON
Model : Concorde Mix MKII
Category : Uncategorized