6500-2 - Measuring equipment FLUKE - Free user manual and instructions
Find the device manual for free 6500-2 FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Portable Appliance Tester (PAT) |
| Brand | Fluke |
| Model | 6500-2 |
| Category | Measuring Equipment |
| Dimensions (approx.) | 275 x 130 x 280 mm |
| Weight (approx.) | 2.5 kg |
| Power Supply | 230 V AC, 50/60 Hz |
| Main Functions | Insulation resistance, earth bonding, leakage current, polarity check |
| Display | Backlit LCD with pass/fail indication |
| Test Ranges | Insulation: 0.1 MΩ to 200 MΩ; Earth bond: 0.01 Ω to 1.99 Ω |
| Safety Rating | CAT II 300 V, double insulation |
| Memory Storage | Stores up to 500 test results |
| Data Transfer | USB interface for PC connectivity |
| Maintenance & Cleaning | Wipe with damp cloth; no solvents. Annual calibration recommended. |
| Safety Precautions | Use only with specified test leads; do not exceed voltage limits. |
| Spare Parts & Repairability | Replaceable test leads, probes, and mains cable. Service by qualified personnel. |
| General Information | Designed for quick and reliable safety testing of electrical appliances. |
Frequently Asked Questions - 6500-2 FLUKE
How do I perform an insulation test with the Fluke 6500-2?
Select the insulation test mode using the rotary dial. Connect the test leads to the appliance plug and press the test button. The result is displayed on the LCD. A pass/fail indication is given based on preset limits.
What does a 'FAIL' result mean?
A FAIL result indicates that the measured value exceeds the safety limit for that test. For example, an insulation resistance below 1 MΩ typically indicates a potential hazard. Check the appliance and retest or refer to the manual for specific limits.
Can I test IT equipment (e.g., computers) with the 6500-2?
Yes, but use appropriate adapters for different plug types. The 6500-2 is designed for standard appliance testing, but for sensitive electronics, consider using an isolation transformer or follow manufacturer guidelines.
How do I transfer stored results to a PC?
Connect the 6500-2 to your PC via the USB cable. Install the included software (FlukeView or similar) and follow the instructions to download the test records.
What is the calibration interval for the 6500-2?
Fluke recommends annual calibration to ensure accuracy. Contact an accredited calibration service or Fluke authorized service center.
How do I replace the fuse?
The Fluke 6500-2 has a user-replaceable fuse inside the battery/fuse compartment. Open the compartment with a screwdriver, remove the old fuse, and replace with the same rating (e.g., 1A 250V). Always use a fuse of the specified type.
What does the 'bAt' symbol on the display mean?
The 'bAt' symbol indicates low battery voltage. Replace the batteries (typically 6 x 1.5V AA cells) as soon as possible to maintain accuracy.
Can I test three-phase appliances?
The 6500-2 is primarily for single-phase appliances. For three-phase testing, you need an adapter or a specific test mode if supported. Refer to the manual for three-phase testing procedures.
How do I clean the 6500-2?
Disconnect the tester from mains. Use a soft, damp cloth with mild soap to wipe the exterior. Do not use solvents or abrasive cleaners. Allow to dry before use.
What accessories come with the Fluke 6500-2?
The standard package includes the tester, three test leads (red, black, green), an alligator clip, a mains cord, and a quick reference guide. Some versions may include a carrying case.
User questions about 6500-2 FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual 6500-2 - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 6500-2 by FLUKE.