LPL-306 - Dishwasher Milectric - Free user manual and instructions
Find the device manual for free LPL-306 Milectric in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Milectric |
| Model | LPL-306 |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 40 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Efficiency Class | E |
| Number of Place Settings | 12 |
| Noise Level | 49 dB(A) |
| Wash Programs | Eco 50°C, Intensive 70°C, Quick 30 min, Glass 40°C, Pre-rinse |
| Drying System | Condenser drying with heat exchanger |
| Water Consumption | 9.5 L per cycle (Eco program) |
| Energy Consumption | 0.92 kWh per cycle (Eco program) |
| Adjustable Racks | Upper basket height adjustable, lower basket with foldable tines |
| Delay Start | Yes, up to 24 hours |
| Child Lock | Yes |
| Flood Protection | AquaStop system (leak protection hose) |
| Control Panel | LED display with touch buttons |
| Interior Material | Stainless steel |
| Filter System | Self-cleaning triple filter system |
| Spare Parts Availability | Filters, spray arms, racks, detergent dispenser, door seal |
| Repairability Index | 7.5 / 10 |
| Included Accessories | Salt container, rinse aid dispenser, cutlery basket, user manual |
Frequently Asked Questions - LPL-306 Milectric
How do I reset the Milectric LPL-306 dishwasher?
To reset, press and hold the Start/Reset button for 3 seconds. The display will show '0:01' and the unit will drain for 1 minute, then turn off. Open the door to complete the reset.
Why is the dishwasher not drying the dishes properly?
Ensure rinse aid is filled and the dispenser is set to a higher setting (e.g., 4-5). Also, select a program with drying like Eco or Intensive. Avoid opening the door immediately after cycle; wait 10-15 minutes for steam to condense.
How often should I clean the dishwasher filter?
Clean the microfilter and coarse filter after every 5-10 cycles. Rinse under running water and remove any food debris. The fine filter should be scrubbed gently with a soft brush once a month.
What does error code E15 mean on the display?
Error E15 indicates a water leak in the base pan. Turn off the water supply, unplug the unit, and tilt it slightly to drain excess water. Dry the base with a cloth. If the error persists, contact a technician.
Can I use regular dish soap instead of dishwasher detergent?
No, only use dishwasher-specific detergent (powder, gel, or tabs). Regular dish soap creates excessive suds that can damage the machine and cause leaks.
How do I prevent hard water spots on glasses?
Fill the rinse aid dispenser regularly and adjust the dosage (usually 3-4). Also, use dishwasher salt in the softener unit if your water is hard (>7 °dH). Set the water hardness level in the settings menu.
What is the maximum load capacity?
The LPL-306 holds up to 12 place settings. Place plates in the lower basket facing inward, glasses and cups in the upper basket. Avoid overloading to ensure proper cleaning.
How do I install the dishwasher?
Installation must be done by a qualified technician. Connect the water supply hose (max 60°C), secure the drain hose to a siphon or waste pipe, and plug into a grounded outlet. Level the unit using the adjustable feet.
Why is the dishwasher making a loud noise during operation?
Check if spray arms are blocked by large items or if a cutlery piece fell and obstructs the pump. Also, ensure the dishwasher is leveled. If noise continues, inspect the drain pump for foreign objects.
How do I clean the dishwasher itself?
Run an empty hot cycle with a dishwasher cleaner or a cup of white vinegar placed in the top rack. Clean the door seal with a damp cloth regularly. Every 3 months, remove and clean the spray arms under running water.
User questions about LPL-306 Milectric
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual LPL-306 - Milectric and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LPL-306 by Milectric.