EB-PU2213B - Projector EPSON - Free user manual and instructions
Find the device manual for free EB-PU2213B EPSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Professional laser projector |
| Model | EB-PU2213B |
| Brand | Epson |
| Display technology | 3LCD (3-chip) |
| Resolution | WUXGA (1920 x 1200) |
| Brightness (lumens) | 7000 lumens (center) / 6600 lumens (color light output) |
| Contrast ratio | 2,500,000:1 (dynamic) |
| Light source | Laser diode (blue laser + phosphor) |
| Light source life | Up to 20,000 hours (normal mode), 30,000 hours (eco mode) |
| Lens | Interchangeable (optional lenses available) |
| Zoom | Motorized zoom (depending on lens) |
| Keystone correction | Vertical and horizontal (motorized) |
| Input signals | HDMI, DVI-D, VGA (D-sub 15 pin), HDBaseT, SDI (optional) |
| Network connectivity | Ethernet (RJ-45), Wi-Fi (optional), RS-232C, USB |
| Dimensions (W x D x H) | 545 x 509 x 164 mm (with feet) |
| Weight | Approx. 12.6 kg (without lens) |
| Power consumption | 370 W (normal mode), 0.3 W (standby) |
| Noise level | 35 dB (normal mode), 29 dB (eco mode) |
| Operating temperature | 0°C to 45°C |
| Included accessories | Power cable, remote control, batteries, quick start guide |
Frequently Asked Questions - EB-PU2213B EPSON
How do I replace the lens on the Epson EB-PU2213B?
The lens is interchangeable. To replace, turn off the projector and unplug it. Press the lens release button, rotate the lens counterclockwise, and pull it out. Insert the new lens aligning the guide pins, rotate clockwise until it clicks, and secure the lens lock.
Can I use the projector without a lens?
No, the projector requires a lens to project an image. Always use a compatible Epson lens.
What is the maximum projection distance for the EB-PU2213B?
Projection distance depends on the lens installed. For example, with the standard zoom lens, you can project a 100-inch image from approximately 2.9 to 4.6 meters. Refer to the lens specifications for exact ranges.
How do I clean the air filter?
Turn off the projector and unplug it. Open the filter cover on the side. Remove the filter and gently vacuum or wash it with water (allow to dry completely before reinserting). Replace if damaged. Clean every 1000 hours of use.
Is the EB-PU2213B compatible with 4K signals?
Yes, it accepts 4K input signals (up to 4096x2160 at 60Hz) and downscales them to its native WUXGA resolution for display.
How do I perform a factory reset?
Go to the menu: Settings > Reset > Reset All. Confirm with 'Yes'. The projector will restart with default settings.
Why is the projector overheating?
Ensure air vents and filters are clean. Check if the ambient temperature is below 45°C and the projector has at least 30 cm clearance around vents. Reduce brightness or switch to eco mode.
Can I connect my laptop via USB?
Yes, the USB port supports USB display (for video) and also serves as a service port. For HDMI or VGA connections, use the corresponding ports.
What is the warranty period?
Epson offers a standard 3-year limited warranty for projectors, including parts and labor. Laser light source is covered for up to 5 years based on usage.
How do I replace the laser light source?
The laser light source is not user-replaceable. If it fails, contact Epson support or an authorized service center for replacement. The light source is rated for up to 30,000 hours.
User questions about EB-PU2213B EPSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual EB-PU2213B - EPSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EB-PU2213B by EPSON.
USER MANUAL EB-PU2213B EPSON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EPSON
Model : EB-PU2213B
Category : Projector