SlimPAR 56 ILS - Lamp Chauvet - Free user manual and instructions
Find the device manual for free SlimPAR 56 ILS Chauvet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Can |
| Light Source | 56 LEDs (0.5W each) |
| Color Mixing | RGB (Red, Green, Blue) |
| Power Consumption | 30W |
| Input Voltage | 100-240V AC, 50/60Hz |
| DMX Channels | 4, 6, 7, or 8 selectable |
| Beam Angle | 25 degrees |
| Housing Material | Aluminum die-cast |
| Dimensions (L x W x H) | 10.5 x 6.5 x 8.5 inches (267 x 165 x 216 mm) |
| Weight | 4.5 lbs (2.0 kg) |
| Cooling | Passive convection |
| Control Modes | DMX, Master/Slave, Sound-Active, Standalone |
| Fuse | 1A, 250V |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Mounting | Floor standing or hanging via yoke |
| Included Accessories | Power cord, DMX cable, mounting brackets |
| Safety Features | Overheat protection, safety cable loop |
| Maintenance | Clean lens with dry cloth; avoid moisture |
Frequently Asked Questions - SlimPAR 56 ILS Chauvet
How do I reset the fixture to factory defaults?
Press and hold the Mode button for 5 seconds until all LEDs flash. Release to reset.
What DMX channel modes are available?
The fixture supports 4, 6, 7, and 8-channel modes. Use the DMX Channel menu to select.
How can I set up Master/Slave mode?
Set one fixture as Master (DMX mode OFF, then select Slave mode on others). Connect via DMX cable.
Why is the fixture not responding to DMX?
Check DMX address, cable connection, and terminate the chain with a 120 ohm resistor. Ensure the controller is on.
How do I clean the lens?
Use a soft, dry cloth. For stubborn dirt, lightly dampen with water. Do not use solvents or abrasive cleaners.
What is the maximum ambient temperature for safe operation?
Do not exceed 40°C (104°F). Allow 12 inches (30 cm) clearance from combustible materials.
How do I replace the fuse?
Unplug the fixture. Open the fuse holder on the back panel with a flathead screwdriver. Replace with a 1A, 250V fuse only.
Can this fixture be used outdoors?
No, the SlimPAR 56 ILS is designed for indoor use only. Do not expose to rain or moisture.
What is the Sound-Active mode?
The fixture changes color and pattern in response to music via the built-in microphone. Set mode to Sound Active in menu.
How do I mount the fixture on a truss?
Attach the yoke to the fixture and secure to truss using a clamp (not included). Always use a safety cable as secondary support.
User questions about SlimPAR 56 ILS Chauvet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual SlimPAR 56 ILS - Chauvet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SlimPAR 56 ILS by Chauvet.
USER MANUAL SlimPAR 56 ILS Chauvet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Chauvet
Model : SlimPAR 56 ILS
Category : Lamp