IntelliFax-4750e - Printer BROTHER - Free user manual and instructions
Find the device manual for free IntelliFax-4750e BROTHER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Plain Paper Fax Machine / Multifunction Printer |
| Model | IntelliFax-4750e |
| Brand | Brother |
| Dimensions (W x D x H) | Approx. 15.4 x 15.0 x 10.2 inches (391 x 381 x 259 mm) |
| Weight | Approx. 18.1 lbs (8.2 kg) |
| Power Supply | AC 120V, 60Hz (US) / AC 220-240V, 50/60Hz (EU) |
| Power Consumption (Standby) | Approx. 10 W |
| Power Consumption (Copying) | Approx. 170 W |
| Main Functions | Fax, copy, scan, PC fax |
| Fax Speed (Modem) | 33.6 kbps (V.34) |
| Paper Handling | Up to 250-sheet paper tray, manual feed slot |
| Print Technology | Laser / LED |
| Print Resolution | Up to 600 x 600 dpi |
| Copy Resolution | Up to 300 x 300 dpi |
| Scanner Type | Flatbed / ADF (up to 20 sheets) |
| Connectivity | Phone line (RJ-11), parallel port (IEEE 1284), USB 1.1 (optional) |
| Maintenance | Clean scanner glass and rollers periodically; replace toner and drum as needed |
| Safety | Class 1 Laser Product; do not stare into laser beam; keep away from water |
| Spare Parts / Repairability | Toner cartridge (TN-630 / TN-660), drum unit (DR-630), ADF roller kit |
| General Information | User manual available in PDF; includes troubleshooting guide |
Frequently Asked Questions - IntelliFax-4750e BROTHER
How do I load paper into the IntelliFax-4750e?
Open the paper tray cover, adjust the paper guides to the paper size, and insert a stack of plain paper (up to 250 sheets) face down. Close the cover and pull out the extension tray if needed. Refer to the loading paper section in the manual for details.
The fax machine is not receiving faxes. What should I check?
First, ensure the phone line is properly connected to the LINE jack. Check that the machine is set to the correct reception mode (Auto, Fax/Tel, or Manual). Make sure there is dial tone and that no other devices are off-hook. Verify the ring delay settings if using Auto mode.
How do I replace the toner cartridge?
Open the front cover, remove the drum unit together with the toner cartridge. Press the green lever to release the toner cartridge from the drum. Insert a new toner cartridge (e.g., Brother TN-630) into the drum unit until it clicks. Reinstall the assembly and close the cover. Reset the drum counter if prompted.
Why is my print quality poor with streaks or fading?
Poor print quality can be due to low toner, a worn drum, or dirty corona wires. First, shake the toner cartridge gently to redistribute toner. If the issue persists, replace the drum unit or clean the corona wire using the built-in cleaner. Also try printing a cleaning page from the menu.
How do I send a fax?
Place the document face down on the scanner glass or into the ADF (up to 20 pages). Dial the recipient’s fax number using the keypad or speed dial. Press Fax Start. For manual dialing, lift the handset, dial, wait for fax tones, then press Start.
The machine displays 'Replace Drum'. How do I reset it?
The drum unit (DR-630) has a limited lifespan. To reset the drum counter after replacement, press Menu, navigate to Maintenance > Parts Life > Drum, then select Reset. Confirm by pressing Yes. Alternatively, follow the manual instructions.
Can I connect this fax to a computer?
Yes, the IntelliFax-4750e can be connected to a PC via a parallel port or an optional USB interface. Install the Brother MFL-Pro Suite software to use PC fax and scanning functions. Refer to the manual for driver installation steps.
How do I clean the scanner glass?
Unplug the machine. Lift the document cover and gently wipe the glass with a soft, lint-free cloth dampened with a mild glass cleaner. Avoid abrasive cleaners. Allow to dry before closing. This prevents streaks on copies and faxed documents.
What is the difference between Fax/Tel and Auto reception modes?
In Auto mode, the machine answers all calls and listens for fax tones; if none, it rings for a voice call (using a connected telephone). In Fax/Tel mode, the machine automatically switches between fax and phone based on the number of rings. Adjust settings via the Receiving Mode menu.
Where can I find the user manual for this model?
The user manual for the Brother IntelliFax-4750e is available for free download in PDF format from notice-facile.com or the official Brother support website. It contains detailed instructions on setup, operation, maintenance, and troubleshooting.
User questions about IntelliFax-4750e BROTHER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual IntelliFax-4750e - BROTHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IntelliFax-4750e by BROTHER.
USER MANUAL IntelliFax-4750e BROTHER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BROTHER
Model : IntelliFax-4750e
Category : Printer