CONTROL SYSTEM - Air Conditioning HAIER - Free user manual and instructions
Find the device manual for free CONTROL SYSTEM HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Air Conditioning Control System |
| Brand | Haier |
| Model | CONTROL SYSTEM |
| Dimensions (approx.) | 120 x 80 x 20 mm (wall-mounted controller) |
| Weight (approx.) | 150 g |
| Power Supply | 2 x AAA batteries (DC 3V) or low-voltage wiring |
| Display Type | LCD screen with backlight |
| Supported Modes | Cool, Heat, Fan, Dry, Auto |
| Fan Speeds | Low, Medium, High, Auto |
| Temperature Range | 16°C – 30°C (adjustable in 1°C increments) |
| Timer Functions | On/Off timer up to 24 hours |
| Sleep Mode | Yes, gradual temperature adjustment |
| Swing Control | Horizontal and vertical louver adjustment |
| Wireless Connectivity | Infrared (IR) remote control |
| Languages Supported | English, French, Spanish, German, Italian, etc. |
| Mounting | Wall-mounted or handheld (remote) |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Battery Replacement | Remove cover, replace with new AAA batteries, observe polarity |
| Safety | Do not expose to water; keep away from heat sources; use only specified power |
| Repair Parts | Batteries, remote control unit (replaceable) |
| Operating Temperature | 0°C – 50°C (controller) |
Frequently Asked Questions - CONTROL SYSTEM HAIER
How to program the timer on the Haier CONTROL SYSTEM?
Press the Timer button once to set the on-time, press again to set off-time. Use +/- buttons to adjust hours. Confirm with OK or wait 5 seconds.
What does error code E1 mean?
Error E1 indicates a communication error between the control system and the indoor unit. Check wiring connections or reset power.
How to reset the Haier CONTROL SYSTEM to factory settings?
Press and hold the Mode and Fan buttons simultaneously for 5 seconds until all indicators flash. Release to reset.
Can I use the CONTROL SYSTEM with multiple indoor units?
Yes, the CONTROL SYSTEM can support up to 4 indoor units in a multi-split configuration. Assign each unit a unique address in the settings.
Why is the display not showing anything?
Possible causes: dead batteries, battery polarity reversed, or LCD damaged. Replace batteries first. If issue persists, contact support.
How to change temperature from Celsius to Fahrenheit?
While the controller is off, press and hold the + and - buttons together for 3 seconds to toggle between °C and °F.
What is the energy-saving mode?
Energy-saving mode adjusts the temperature setpoint by 2-3°C automatically to reduce power consumption while maintaining comfort.
How to pair the remote control with the air conditioner?
Point the remote at the indoor unit and press Mode + Fan for 3 seconds. The unit will beep once to confirm pairing.
Can I lock the controls to prevent accidental changes?
Yes, press and hold the Mode button for 5 seconds to activate child lock. A lock icon appears. Repeat to unlock.
Where can I download the full user manual?
The full manual is available for free download at notice-facile.com in PDF format. Search for 'Haier CONTROL SYSTEM'.
User questions about CONTROL SYSTEM HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual CONTROL SYSTEM - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CONTROL SYSTEM by HAIER.