VSX-1124-K - Receiver PIONEER - Free user manual and instructions
Find the device manual for free VSX-1124-K PIONEER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 7.2-channel AV Receiver |
| Brand | Pioneer |
| Model | VSX-1124-K |
| Dimensions (W x H x D) | 435 x 173 x 370.5 mm |
| Weight | 11.6 kg |
| Power Consumption | 650 W (Standby: 0.1 W) |
| Power Output | 110 W per channel (8 ohms, 1 kHz, 0.9% THD) |
| Number of Channels | 7.2 |
| Supported Audio Formats | Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus |
| Video Features | 4K/60Hz passthrough, 4K upscaling, 3D ready |
| HDMI Inputs/Outputs | 6 inputs / 1 output (with ARC support) |
| Wireless Connectivity | Bluetooth, AirPlay, Wi-Fi (optional adapter) |
| Auto Calibration | MCACC (Multi-Channel Acoustic Calibration) |
| FM/AM Tuner | Yes (with 63 presets) |
| Input Sensitivity | 200 mV (line), 2.5 mV (phono) |
| Signal-to-Noise Ratio | 100 dB (line), 80 dB (phono) |
| Frequency Response | 5 Hz – 100 kHz (+1/-3 dB) |
| Speaker Impedance | 6 – 16 ohms |
| Power Supply | AC 120 V, 60 Hz |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety Precautions | Do not expose to moisture. Ensure proper ventilation. |
| Spare Parts / Repairability | Contact authorized Pioneer service centers for parts. |
Frequently Asked Questions - VSX-1124-K PIONEER
How do I connect the Pioneer VSX-1124-K to my TV?
Use an HDMI cable to connect the HDMI OUT port on the receiver to an HDMI input on your TV. Ensure the TV is set to the correct input source.
What is the correct way to run MCACC auto calibration?
Place the supplied microphone at the listening position, then go to the setup menu and select Auto MCACC. Follow the on-screen instructions to complete calibration.
Can the VSX-1124-K play audio via Bluetooth?
Yes, the receiver has built-in Bluetooth. Press the BT AUDIO button on the remote, pair your device from its Bluetooth settings, and stream audio.
What should I do if there is no sound from the speakers?
Check that the speakers are properly connected, the correct input source is selected, and the volume is turned up. Also verify that the receiver is not in mute mode.
How do I set up multi-zone audio?
Connect speakers to the Zone 2 speaker terminals and select the Zone 2 source in the setup menu. Use the remote to control volume in Zone 2.
Does the receiver support 4K video?
Yes, the VSX-1124-K supports 4K/60Hz passthrough and 4K upscaling for compatible sources.
How can I reset the receiver to factory defaults?
While the receiver is on, press and hold the STANDBY/ON button for about 5 seconds until 'RESET' appears on the display. Confirm by pressing ENTER.
What speaker impedance is recommended?
The receiver is designed for speakers with an impedance of 6 to 16 ohms. Using lower impedance speakers may cause overheating.
Can I connect a turntable to this receiver?
Yes, connect the turntable to the PHONO input. Ensure the turntable has a moving magnet (MM) cartridge; the receiver has a built-in phono preamp.
How do I update the firmware?
Connect the receiver to the internet via Ethernet or a Wi-Fi adapter (sold separately). Go to the Firmware Update menu in the settings and follow the prompts.
User questions about VSX-1124-K PIONEER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual VSX-1124-K - PIONEER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VSX-1124-K by PIONEER.