P3010B - Smoke detector KIDDE - Free user manual and instructions
Find the device manual for free P3010B KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Alarm |
| Brand | Kidde |
| Model | P3010B |
| Power Source | Sealed Lithium Battery (non-replaceable) |
| Battery Life | Up to 10 years |
| Sensor Type | Photoelectric |
| Detection Method | Smoke detection (smoldering fires) |
| Alarm Loudness | 85 dB at 10 feet |
| Test/Silence Button | Yes |
| End-of-Life Signal | Chirps every 30-40 seconds when battery is low or after 10 years |
| Hush Feature | Temporarily silences nuisance alarms |
| Installation Method | Ceiling or wall mounting with included hardware |
| Dimensions (Diameter x Height) | Approx. 5.6 x 1.5 inches |
| Weight | Approx. 0.5 lbs |
| Operating Temperature Range | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | Up to 95% relative humidity (non-condensing) |
| Certifications | UL Listed |
| Compliance | NFPA 72, FCC Part 15 |
| Maintenance | Clean with compressed air or vacuum; no battery replacement needed |
| Warranty | 10-year limited manufacturer warranty |
| Included Accessories | Mounting bracket, screws, and anchors |
Frequently Asked Questions - P3010B KIDDE
How do I install the Kidde P3010B smoke alarm?
Mount the alarm on a ceiling or wall using the included bracket. Remove the bracket, mark holes, drill anchors, and screw bracket. Then twist the alarm onto the bracket until it locks.
How do I test the alarm?
Press and hold the test/silence button until the alarm sounds (a loud beep). Release the button; the alarm should stop. Test weekly.
What should I do if the alarm chirps every 30-40 seconds?
A chirp indicates low battery or end of life. Since the battery is sealed and non-replaceable, you must replace the entire alarm after 10 years or when chirping persists.
How can I silence a nuisance alarm (e.g., from cooking)?
Press the test/silence button briefly. The alarm will pause for about 10 minutes and then automatically reset. If the alarm continues, move it away from the source.
Can I replace the battery in the P3010B?
No, the battery is sealed and non-serviceable. The entire alarm must be replaced every 10 years or when the end-of-life signal sounds.
Where should I place the smoke alarm?
Install on the ceiling or high on a wall, at least 4 inches from corners and away from air vents, bathrooms, and kitchens to prevent false alarms. Each floor and every bedroom should have one.
What does the flashing red light mean?
The red LED flashes every 30-60 seconds to indicate normal operation. A continuous flash may indicate an alarm condition.
How do I clean the smoke alarm?
Use compressed air or a vacuum cleaner with a soft brush attachment to remove dust and debris from the vents. Do not use water or solvents.
How do I know when to replace the alarm?
The alarm will chirp twice every 30-40 seconds when end of life is reached (approximately 10 years from activation). Also, replace if it fails to test properly.
Is the Kidde P3010B interconnected with other alarms?
No, the P3010B is a standalone unit and cannot be interconnected with other alarms. For interconnected systems, consider Kidde hardwired or wireless models.
User questions about P3010B KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual P3010B - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P3010B by KIDDE.