DN360 - Effect machine Klark Teknik - Free user manual and instructions
Find the device manual for free DN360 Klark Teknik in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 31-Band Stereo Graphic Equalizer |
| Brand | Klark Teknik |
| Model | DN360 |
| Channels | 2 (Stereo) |
| Frequency Bands | 31 bands per channel, ISO 1/3-octave |
| Frequency Response | 20 Hz – 20 kHz ±0.5 dB |
| Input/Output Connectors | XLR and 1/4" TRS balanced |
| Maximum Input Level | +21 dBu |
| Maximum Output Level | +21 dBu |
| Signal-to-Noise Ratio | >100 dB (20 Hz – 20 kHz) |
| Total Harmonic Distortion | <0.01% @ 1 kHz, +20 dBu |
| High-Pass Filter | 40 Hz, 12 dB/octave |
| Power Supply | 100-240 V AC, 50/60 Hz, 20 W |
| Dimensions (W x H x D) | 483 x 88 x 200 mm (19" x 3.5" x 7.9") |
| Weight | 4.5 kg (9.9 lbs) |
| Rackmount | 2U, 19" standard |
| Bypass Switch | Per channel, footswitchable via rear panel |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
Frequently Asked Questions - DN360 Klark Teknik
How do I set up the DN360 for the first time?
Connect the DN360 to your mixer's insert points or between the preamp and amplifier. Ensure all faders are at 0 dB initially. Apply power and adjust faders to shape the sound as desired.
Can I use the DN360 with a subwoofer?
Yes, use the high-pass filter to roll off low frequencies to the main speakers and set the low bands on the DN360 to boost the subwoofer channel if needed.
How do I clean the faders and controls?
Use a dry or slightly damp lint-free cloth. For faders, use an electronic contact cleaner spray sparingly and move the fader back and forth. Do not use abrasive cleaners.
Why is there no output from the DN360?
Check power connections, ensure the bypass switch is not engaged, and verify that input/output cables are securely connected. Also check that the master level controls are not set to minimum.
How do I reduce feedback during a live performance?
Identify the feedback frequency by listening or using an RTA. Then cut the corresponding band(s) on the DN360 moderately. Avoid boosting frequencies excessively.
Can I use the DN360 for recording in a studio?
Yes, the DN360's low noise and distortion make it suitable for recording. Use it to correct room acoustics or shape instrument tones during mixdown.
What does the 'Bypass' switch do?
The Bypass switch routes the signal directly from input to output without any equalization, allowing you to compare processed and unprocessed sound instantly.
Is the DN360 stereo or dual mono?
It can operate in stereo mode (linked controls) or dual mono mode where each channel can be adjusted independently. A rear-panel switch selects the mode.
How do I calibrate the faders?
The DN360 faders are calibrated at the factory. If you suspect a misalignment, consult a qualified technician. Do not attempt to recalibrate without proper tools.
What is the warranty period for the DN360?
Klark Teknik typically offers a 3-year limited warranty from the date of purchase. Check with your local dealer for specific terms.
User questions about DN360 Klark Teknik
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual DN360 - Klark Teknik and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DN360 by Klark Teknik.
USER MANUAL DN360 Klark Teknik
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Klark Teknik
Model : DN360
Category : Effect machine