VPar Pak - Lighting Adj - Free user manual and instructions
Find the device manual for free VPar Pak Adj in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Can |
| Brand | ADJ (American DJ) |
| Model | VPar Pak |
| Light Source | LED (RGB or RGBA) |
| Power Consumption | 30W |
| Input Voltage | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 10.2 x 8.5 x 10.2 in (259 x 216 x 259 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Control Modes | DMX, Sound Active, Master/Slave, Auto |
| DMX Channels | 3, 5, or 7 selectable |
| Beam Angle | 25 degrees |
| Housing Material | Aluminum |
| Cooling | Passive (fanless) |
| IP Rating | IP20 (indoor use only) |
| Mounting | Floor stand or truss (bracket included) |
| Maintenance | Clean with a soft, dry cloth. Avoid liquids. |
| Safety | Do not expose to rain or moisture. Do not open housing. |
| Spare Parts | LED module non-replaceable. Contact ADJ for service. |
| Warranty | 2 years (limited) |
Frequently Asked Questions - VPar Pak Adj
How do I set the DMX address on the VPar Pak?
Use the up/down buttons to select the desired DMX address. Press Enter to confirm. The display will show the current address.
Can I use the VPar Pak outdoors?
No, the VPar Pak has an IP20 rating and is designed for indoor use only. Keep it away from rain and moisture.
How do I clean the fixture?
Use a soft, dry cloth to wipe the housing and lens. Do not use any liquids or solvents.
What power cord does the VPar Pak use?
It uses a standard IEC power cord (IEC C13). The input voltage is AC 100-240V.
How do I activate Sound Active mode?
Press Mode until you reach Sound Active. The fixture will react to music via its internal microphone.
Can I daisy-chain multiple VPar Paks?
Yes, you can connect units in daisy-chain via DMX in/out. Use up to 32 units on a single DMX line.
What if the LED stops working?
The LED module is not user-replaceable. Contact ADJ technical support for servicing.
How do I set the fixture to Master/Slave?
Set one unit as Master (Mode: Auto or Sound Active) and other units as Slave. Connect via DMX cable.
What is the beam angle of the VPar Pak?
The beam angle is 25 degrees.
Does the VPar Pak have a power switch?
No, it does not have a power switch. It powers on when connected to a power source.
User questions about VPar Pak Adj
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual VPar Pak - Adj and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VPar Pak by Adj.
USER MANUAL VPar Pak Adj
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Adj
Model : VPar Pak
Category : Lighting