NetWave NWK2 - Wi-Fi repeater ComNet - Free user manual and instructions
Find the device manual for free NetWave NWK2 ComNet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater |
| Brand | ComNet |
| Model | NetWave NWK2 |
| Dimensions (approx.) | 100 x 60 x 30 mm |
| Weight (approx.) | 150 g |
| Power Supply | Micro USB, 5V/1A (adapter included) |
| Wi-Fi Standards | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Speed | 300 Mbps |
| Wireless Security | WEP, WPA/WPA2 |
| Number of External Antennas | 2 |
| WPS Button | Yes |
| Ethernet Port | 1 x 10/100 Mbps RJ45 |
| LED Indicators | Power, WLAN, LAN, WPS |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| Mounting Type | Desktop or wall mount (screws not included) |
| Cleaning Instructions | Wipe with a soft dry cloth; do not use liquids or sprays |
| Safety Precautions | Use only supplied adapter; keep away from water and heat sources |
| Compliance | CE, FCC |
Frequently Asked Questions - NetWave NWK2 ComNet
How do I set up the NetWave NWK2 repeater?
Press the WPS button on your router, then within 2 minutes press the WPS button on the NWK2. Alternatively, use the web interface at 192.168.10.1 or the mobile app.
What is the maximum range of the NWK2?
The range depends on obstacles and interference, but typically it can extend your Wi-Fi up to 30 meters indoors.
Can I use the NWK2 with any router?
Yes, it works with any standard router that supports 802.11 b/g/n on the 2.4 GHz band.
How many devices can connect to the NWK2?
It can support up to 15-20 simultaneous connections depending on bandwidth usage.
What should I do if the repeater is not working?
First, reset the device by holding the reset button for 10 seconds. Then reconfigure it. Check LED indicators: Power (green), WLAN (blinking green) for proper operation.
Does the NWK2 have an Ethernet port?
Yes, it has one 10/100 Mbps RJ45 port that can be used to connect wired devices or act as an access point.
Can I change the SSID and password?
Yes, you can change the SSID and password via the web interface at 192.168.10.1 using default credentials (admin/admin).
What is the default IP address?
The default IP is 192.168.10.1. Make sure your computer is on the same subnet (e.g., 192.168.10.x) to access.
How do I factory reset the NWK2?
Press and hold the Reset button (located on the side) for about 10 seconds until all LEDs flash, then release.
Is the NWK2 compatible with 5 GHz networks?
No, the NWK2 operates only on 2.4 GHz. For dual-band extenders, consider other models.
User questions about NetWave NWK2 ComNet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual NetWave NWK2 - ComNet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NetWave NWK2 by ComNet.
USER MANUAL NetWave NWK2 ComNet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ComNet
Model : NetWave NWK2
Category : Wi-Fi repeater