Netwave NW2 - Wi-Fi repeater ComNet - Free user manual and instructions
Find the device manual for free Netwave NW2 ComNet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater |
| Brand | ComNet |
| Model | Netwave NW2 |
| Wireless Standard | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Max Data Rate | 300 Mbps |
| Wireless Security | WEP, WPA, WPA2 |
| Ports | 1 x Fast Ethernet (10/100 Mbps) |
| Antenna | 2 x Internal antennas |
| Power Supply | 5V DC, 1A via micro USB |
| Power Consumption | 5 W max |
| Dimensions (W x D x H) | 80 x 60 x 20 mm |
| Weight | 50 g |
| LED Indicators | Power, WAN, WLAN, Signal strength |
| WPS Button | Yes |
| Reset Button | Yes |
| Setup Method | Web interface (192.168.10.1) or WPS |
| Operating Range | Up to 100 m (open area) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety Certifications | CE, FCC, RoHS |
| Package Contents | Repeater, micro USB cable, user manual |
Frequently Asked Questions - Netwave NW2 ComNet
How do I reset the ComNet Netwave NW2 to factory settings?
Press and hold the reset button for 10 seconds using a paperclip until the LED indicators flash. The device will reboot with default settings.
What is the default IP address and login for the Netwave NW2?
The default IP is 192.168.10.1 with username 'admin' and password 'admin' (both lowercase). Change them after first setup.
Can the Netwave NW2 work with any router?
Yes, it is compatible with any standard router supporting 802.11 b/g/n on 2.4 GHz. Ensure the router's SSID and password are known.
How do I set up the Netwave NW2 using WPS?
Press the WPS button on your router, then within 2 minutes press the WPS button on the NW2. The WPS LED will blink and turn solid once connected.
What does the signal strength LED indicate?
It shows the repeater's connection quality to the router: 3 LEDs strong, 2 moderate, 1 weak. Move the repeater to improve if weak.
Can I use the Netwave NW2 as a wired access point?
Yes, you can connect it via Ethernet to the router and set it to 'Access Point' mode in the web interface for a stable wired backhaul.
Why is my Netwave NW2 not connecting to the router?
Check that the router is on 2.4 GHz, the password is correct, and the repeater is within range. Try resetting both devices.
How do I update the firmware on the Netwave NW2?
Download the latest firmware from ComNet's support site. Log into the web interface (192.168.10.1), go to System Tools > Firmware Upgrade, and select the file.
Is the Netwave NW2 compatible with dual-band routers?
It only operates on 2.4 GHz. It will repeat the 2.4 GHz signal from a dual-band router but not the 5 GHz band.
What should I do if I forgot the admin password?
Perform a factory reset by holding the reset button for 10 seconds. The login reverts to admin/admin.
User questions about Netwave NW2 ComNet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual Netwave NW2 - ComNet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Netwave NW2 by ComNet.
USER MANUAL Netwave NW2 ComNet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ComNet
Model : Netwave NW2
Category : Wi-Fi repeater