MX722adhe - Printer LEXMARK - Free user manual and instructions
Find the device manual for free MX722adhe LEXMARK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monochrome Laser Multifunction Printer |
| Functions | Print, Copy, Scan, Fax |
| Print Speed | Up to 47 ppm (A4) |
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Automatic |
| Paper Capacity | 650 sheets standard; expandable to 3200 sheets |
| Scanner Type | Flatbed with Automatic Document Feeder (ADF) |
| Scan Resolution | Up to 600 x 600 dpi |
| Display | 7-inch color touchscreen |
| Connectivity | USB 2.0, Gigabit Ethernet, Wi-Fi (optional) |
| Dimensions (WxDxH) | 458 x 472 x 518 mm |
| Weight | 22.7 kg |
| Power Consumption | Typical: 600 W, Standby: 100 W, Sleep: 2.5 W |
| Power Requirements | 100-127 V or 220-240 V AC, 50/60 Hz |
| Maintenance | Replace toner cartridge and imaging unit as needed; clean paper path monthly |
| Safety | Operate on a stable surface; avoid exposure to moisture; use only Lexmark supplies |
| Spare Parts | Toner cartridge (e.g., 24B6xxx), imaging unit, waste toner box, pick rollers |
| Repairability | User-replaceable consumables; service by authorized technician for internal issues |
| Warranty | 1 year limited warranty (extendable) |
| Supported Media | Plain paper, envelopes, labels, cardstock, transparencies |
Frequently Asked Questions - MX722adhe LEXMARK
How do I load paper into the Lexmark MX722adhe?
Open the front tray, adjust the guides, and load paper face up. For the multipurpose feeder, lift the cover and load specialty media.
How do I replace the toner cartridge?
Open the front door, remove the old cartridge, shake the new one gently, pull the seal, and insert until it clicks. Close the door.
My printer shows 'Paper Jam' - what should I do?
Check all paper paths: front door, rear door, and duplex unit. Remove any jammed paper gently. Ensure paper is not wrinkled or overloaded.
How do I set up the printer on a wireless network?
On the touchscreen, go to Settings > Network > Wi-Fi. Select your network and enter the password. You may need the optional Wi-Fi card installed.
What is the recommended maintenance schedule?
Clean the scanner glass and ADF weekly. Replace toner when low. Replace the imaging unit every 60,000 pages. Clean the printer interior every 6 months.
How do I scan a document to email?
Place the document on the glass or ADF. From the home screen, select Scan > Email. Enter the email address and press Send. You must configure email settings first.
The printer is not responding. How can I reset it?
Turn off the printer, wait 30 seconds, and turn it back on. If still unresponsive, unplug the power cord for 2 minutes, then reconnect.
What types of paper can I use?
Use Lexmark-approved paper: plain (60-90 g/m²), cardstock (up to 200 g/m²), envelopes, labels, and transparencies. Avoid damaged or glossy paper.
How do I print a configuration page?
Press the Home button, touch Settings > Reports > Device Settings. The printer will print a page with current configuration, network settings, and usage.
Where can I find spare parts and consumables?
Visit the Lexmark website or contact an authorized dealer. Use genuine Lexmark toner, imaging unit, waste toner box, and pick rollers for best performance.
User questions about MX722adhe LEXMARK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual MX722adhe - LEXMARK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX722adhe by LEXMARK.
USER MANUAL MX722adhe LEXMARK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LEXMARK
Model : MX722adhe
Category : Printer