i9010 - Smoke detector KIDDE - Free user manual and instructions
Find the device manual for free i9010 KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Detector |
| Brand | Kidde |
| Model | i9010 |
| Sensor Type | Ionization |
| Power Source | 9V Battery (included) |
| Battery Life | Up to 1 year |
| Detection Method | Ionization chamber for fast-flaming fires |
| Alarm Loudness | 85 dB at 10 feet |
| Test/Silence Button | Yes (latching) |
| End-of-Life Warning | Chirps every 30 seconds after 10 years |
| Low Battery Chatter | Chirps every 60 seconds |
| Dimensions (Diameter) | 4.5 inches (11.4 cm) |
| Dimensions (Height) | 1.5 inches (3.8 cm) |
| Weight | 0.5 lbs (0.23 kg) |
| Mounting | Ceiling or wall mount |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | Up to 95% non-condensing |
| Certifications | UL listed |
| Warranty | 10-year limited |
| Maintenance | Vacuum clean annually; replace battery yearly |
| Replacement | Replace entire unit after 10 years |
Frequently Asked Questions - i9010 KIDDE
How do I install the Kidde i9010 smoke detector?
Mount the detector on a ceiling or wall using the included bracket. Insert a 9V battery (ensure correct polarity), then twist the detector onto the bracket until it locks. Test the alarm by pressing the test button.
Why is my smoke detector chirping every 30 seconds?
A chirp every 30-40 seconds indicates the battery is low. Replace with a new 9V battery. If chirping continues after battery change, the unit may be at end-of-life (10 years) and must be replaced.
How do I silence a false alarm?
Press the Test/Silence button to silence the alarm for approximately 8-10 minutes. The detector will automatically reset. If false alarms persist, relocate the unit away from kitchens or bathrooms.
How often should I test the smoke detector?
Test the alarm at least once a week by pressing and holding the Test button until the alarm sounds (2-3 seconds). Release the button to stop the alarm.
What does the end-of-life warning sound like?
After 10 years of operation, the detector will chirp twice every 30 seconds. This indicates the unit must be replaced immediately. The chirping cannot be silenced permanently.
Can I paint my smoke detector?
No, painting the smoke detector can block the vents and sensor, causing malfunction. Only use a vacuum with a soft brush attachment to clean the unit.
Where should I install the smoke detector in my home?
Install on every level of your home, including basements. Place on ceilings or high on walls (within 4 inches of ceiling). Avoid kitchens, bathrooms, and garages to prevent false alarms.
What type of battery does the Kidde i9010 use?
The detector uses a standard 9V alkaline battery. Do not use rechargeable batteries. Replace the battery at least once a year or when the low-battery chirp occurs.
How do I clean the smoke detector?
Use a vacuum cleaner with a soft brush attachment on the vents and openings of the detector at least once a year. Do not use water or cleaning fluids.
Why does my smoke detector go off when I cook?
The ionization sensor is sensitive to small particles from cooking. Install the detector at least 10 feet from cooking appliances, or use the Test/Silence button to temporarily hush the alarm.
User questions about i9010 KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual i9010 - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. i9010 by KIDDE.
USER MANUAL i9010 KIDDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KIDDE
Model : i9010
Category : Smoke detector