EC2112 - Uncategorized IFM - Free user manual and instructions
Find the device manual for free EC2112 IFM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IO-Link Master / Ethernet Gateway |
| Brand | IFM |
| Model | EC2112 |
| Dimensions (H x W x D) | 120 mm x 45 mm x 70 mm |
| Weight | Approx. 150 g |
| Power Supply | 24 V DC ±10% |
| Power Consumption | < 2 W |
| Communication Interface | EtherNet/IP, PROFINET, or Modbus TCP |
| Number of IO-Link Ports | 2 ports (Class A) |
| IO-Link Version | V1.1 |
| Protection Rating | IP67 |
| Operating Temperature | -25 °C to 70 °C |
| Storage Temperature | -40 °C to 85 °C |
| Housing Material | PBT (Polybutylene terephthalate) |
| Connection | M12 connectors (male/female) |
| LED Indicators | Power, Link, Activity per port |
| Configuration | Via web interface or fieldbus |
| Main Functions | Data exchange with IO-Link devices, parameter setting, diagnostics |
| Maintenance & Cleaning | Clean with dry cloth; do not use solvents |
| Safety | Use only with SELV/PELV power supply |
| Spare Parts & Repairability | Unit is not field-repairable; replace as whole |
Frequently Asked Questions - EC2112 IFM
How do I connect the EC2112 to my network?
Connect the EC2112 to your Ethernet network using an M12 connector (D-coded). Assign an IP address via DHCP or static configuration through the web interface.
What is the power supply requirement for the EC2112?
The device requires a 24 V DC power supply (SELV/PELV) with a typical consumption of less than 2 W. Use the M12 L-coded power connector.
How many IO-Link devices can I connect to the EC2112?
The EC2112 has 2 IO-Link ports (Class A). Each port can connect one IO-Link device. A maximum of 2 devices can be connected directly.
What fieldbus protocols does the EC2112 support?
The EC2112 supports EtherNet/IP, PROFINET, and Modbus TCP. You can configure the protocol via the device's web interface.
Is the EC2112 suitable for outdoor use?
With an IP67 rating, the EC2112 is dust-tight and protected against temporary immersion in water. It can be used in harsh industrial environments but avoid direct sunlight exposure.
How do I access the web interface of the EC2112?
Connect the device to your network and use a web browser to enter its IP address. Default credentials are often 'admin' / 'admin' (check manual). Ensure your PC is in the same subnet.
What should I do if the EC2112 is not detected on the network?
Check power supply (LED should be on). Verify Ethernet cable and connection. If using DHCP, ensure a DHCP server is present. Try a static IP address or reset to factory defaults via the button.
Can I daisy-chain multiple EC2112 devices?
Yes, the EC2112 has a built-in Ethernet switch. You can daisy-chain devices using the second Ethernet port (M12). The maximum cable length between devices is 100 m.
How do I update the firmware on the EC2112?
Download the latest firmware from the IFM website. Upload it via the web interface under 'System' > 'Firmware Update'. Do not power off during the update.
What is the operating temperature range of the EC2112?
The device can operate in temperatures from -25 °C to +70 °C. For storage, it can withstand -40 °C to +85 °C.
User questions about EC2112 IFM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EC2112 - IFM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EC2112 by IFM.