ZKBioAccess IVS - Security and Access Control System ZKTeco - Free user manual and instructions
Find the device manual for free ZKBioAccess IVS ZKTeco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security and Access Control System |
| Brand | ZKTeco |
| Model | ZKBioAccess IVS |
| Dimensions (H x W x D) | Approximately 200 x 120 x 50 mm |
| Weight | Approximately 1.2 kg |
| Power Supply | 12V DC, 1A |
| Power Consumption | Less than 10W |
| Display | 2.8-inch TFT color screen |
| Communication Interface | TCP/IP, USB Host, RS232/485, Wiegand |
| Biometric Recognition | Fingerprint and face recognition |
| User Capacity | Up to 1,000 fingerprints and 500 face templates |
| Transaction Storage | Up to 100,000 events |
| Access Control Features | Door lock control, time zones, anti-passback, alarm inputs |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 10% to 80% non-condensing |
| Mounting Type | Wall mount |
| Languages Supported | English, Chinese, Spanish, etc. |
| Software Compatibility | ZKBioAccess IVS software |
| Maintenance | Periodic cleaning of sensors with soft dry cloth; avoid moisture |
| Safety | Anti-tamper switch, emergency unlock via mechanical key |
| Spare Parts | Available from ZKTeco or authorized distributors |
| Warranty | Standard 1-year limited warranty |
Frequently Asked Questions - ZKBioAccess IVS ZKTeco
How do I reset the ZKBioAccess IVS to factory settings?
To reset the device, press and hold the reset button on the back panel for 5 seconds. The device will reboot and restore factory defaults. All user data will be erased.
What types of credentials can be used?
The system supports fingerprint, face recognition, PIN codes, and RFID cards (125kHz or 13.56MHz).
How to connect the device to a network?
Connect an Ethernet cable from your router to the TCP/IP port on the device. Then configure the IP address via the device menu or the software.
Can I use the system without the software?
Basic functions like standalone access control can be configured directly on the device. However, advanced features require the ZKBioAccess IVS software.
How many doors can this system control?
The ZKBioAccess IVS is designed to control one door directly. For multiple doors, additional controllers are needed.
What should I do if the fingerprint sensor is not reading?
Clean the sensor with a soft, dry cloth. Ensure fingers are not wet or dirty. If the issue persists, recalibrate the sensor in the settings.
Is the device weatherproof?
The device is designed for indoor use only. It should not be exposed to rain or direct sunlight.
How to add a new user?
Go to User Management on the device, select 'Add User'. Choose to add via fingerprint, face, card, or PIN. Follow the on-screen instructions.
What does the alarm output do?
The alarm output can be connected to an external siren or alarm system. It triggers when a forced entry or tamper is detected.
How to update the firmware?
Download the latest firmware from the ZKTeco website. Copy it to a USB drive, insert into the device, and select Update Firmware from the menu.
User questions about ZKBioAccess IVS ZKTeco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security and Access Control System in PDF format for free! Find your manual ZKBioAccess IVS - ZKTeco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZKBioAccess IVS by ZKTeco.
USER MANUAL ZKBioAccess IVS ZKTeco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZKTeco
Model : ZKBioAccess IVS
Category : Security and Access Control System