SNC-ZM551 - Surveillance Camera SONY - Free user manual and instructions
Find the device manual for free SNC-ZM551 SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PTZ Network Camera |
| Model | SNC-ZM551 |
| Brand | Sony |
| Image Sensor | 1/2.8-inch Exmor CMOS |
| Effective Pixels | Approx. 2.13 Megapixels |
| Focal Length | 4.7 mm to 94.0 mm (20x optical zoom) |
| Minimum Illumination | 0.5 lux (color, 50 IRE) |
| Pan/Tilt Range | Pan: 360° endless; Tilt: -20° to +90° |
| Video Compression | H.264, MPEG-4, JPEG |
| Max Resolution | 1920 x 1080 (Full HD) |
| Frame Rate | Up to 30 fps at 1920x1080 |
| Dimensions (W x H x D) | Approx. 160 x 175 x 200 mm |
| Weight | Approx. 1.9 kg |
| Power Supply | PoE (IEEE 802.3af) or 12V DC |
| Power Consumption | Max 18 W |
| Operating Temperature | -5°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Ingress Protection | IP66 (weatherproof) |
| Network Interface | 10BASE-T/100BASE-TX (RJ-45) |
| Supported Protocols | IPv4, IPv6, TCP, UDP, HTTP, HTTPS, RTSP, etc. |
| Audio | Two-way audio (line in/out) |
| Alarm I/O | 1ch input, 1ch output |
| Maintenance and Cleaning | Clean housing gently with a soft, dry cloth. Use compressed air for lens. |
| Safety Precautions | Use only supplied or recommended power adapter. Do not expose to rain or moisture. |
| Spare Parts and Repairability | Contact Sony authorized service center for parts. User replaceable parts: none. |
Frequently Asked Questions - SNC-ZM551 SONY
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for about 10 seconds using a paperclip. The camera will reboot with default settings.
What is the maximum resolution and frame rate?
The camera supports up to 1920x1080 at 30 fps in H.264 compression.
Does the camera support PoE?
Yes, the SNC-ZM551 supports PoE (IEEE 802.3af) for both power and data over a single Ethernet cable.
Can I use the camera outdoors?
Yes, it has an IP66 rating, meaning it is protected against dust and powerful water jets.
How do I access the camera remotely?
Connect the camera to your network and assign an IP address. Use a web browser to access the camera's built-in web interface.
What is the minimum illumination for color images?
The camera can capture color images at as low as 0.5 lux (50 IRE).
Does the camera have audio capability?
Yes, it supports two-way audio via line input and output for external microphone and speaker.
Is the camera compatible with ONVIF?
Yes, it supports ONVIF Profile S for interoperability with third-party VMS software.
How do I clean the camera lens?
Use a soft brush or compressed air to remove dust. For smudges, lightly wipe with a lens cleaning cloth.
What should I do if the camera stops responding?
Perform a power cycle by disconnecting power for 30 seconds. If the issue persists, check network cables and try a factory reset.
User questions about SNC-ZM551 SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual SNC-ZM551 - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SNC-ZM551 by SONY.