AP-565 - Access Point Aruba - Free user manual and instructions
Find the device manual for free AP-565 Aruba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Indoor/Outdoor Access Point |
| Wi-Fi Standard | IEEE 802.11ax (Wi-Fi 6) |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | Up to 5.4 Gbps (aggregate) |
| Ethernet Port | 1x 100/1000/2500 Base-T (RJ-45) |
| Bluetooth | Bluetooth 5.0 with BLE |
| Power over Ethernet | 802.3at (PoE+) or 802.3bt (PoE++) |
| DC Power Input | 12 V DC (optional adapter) |
| Dimensions (W x D x H) | 200 x 200 x 45 mm (7.9 x 7.9 x 1.8 in) |
| Weight | 700 g (1.54 lb) |
| Mounting | Wall or ceiling mount (bracket included) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Ingress Protection | IP54 (dust and splash resistant) |
| Antennas | Internal omnidirectional dual-band (4x4:4) |
| Management | Aruba Central, Web UI, CLI, SNMP |
| Security Standards | WPA3, 802.1X, WPA2-Enterprise |
| LED Indicators | Power, status, PoE, Bluetooth |
| Reset Button | Yes (factory reset via pinhole) |
| Clean and Maintenance | Wipe with dry soft cloth; avoid liquids |
| Repairability Index | N/A (sealed unit; parts replaceable by qualified service) |
| Warranty | Limited lifetime warranty (terms apply) |
Frequently Asked Questions - AP-565 Aruba
How do I set up the Aruba AP-565?
Connect the AP to your network via Ethernet with PoE+ (802.3at). Use the Aruba Central app or web UI to configure SSID, security, and management options. Alternatively, use the CLI through a serial console.
Can I mount the AP-565 outdoors?
Yes, the AP-565 has an IP54 rating, making it dust and splash resistant. It is suitable for sheltered outdoor locations. Use the included bracket for wall or ceiling mounting.
What power options are available?
The AP-565 supports Power over Ethernet 802.3at (PoE+) and 802.3bt (PoE++). An optional 12V DC power adapter can also be used if PoE is not available.
How do I update the firmware?
Firmware updates can be performed via Aruba Central, the web UI, or using secure FTP from a TFTP server. Always back up the configuration before updating.
How do I reset the AP-565 to factory defaults?
Press and hold the reset button (pinhole) with a paperclip for at least 10 seconds while the device is powered on. The AP will reboot with factory settings.
What security protocols does the AP-565 support?
It supports WPA3, WPA2-Enterprise, 802.1X, and MAC authentication. For guest networks, captive portal and VPN passthrough are available.
Can I use two 5 GHz bands simultaneously?
The AP-565 is a dual-band device with one 2.4 GHz and one 5 GHz radio. It does not support dual 5 GHz operation; for that, consider Aruba AP-575 or higher.
What is the maximum range?
Range depends on environment. Indoors, typical coverage is 30 meters (100 ft) for 5 GHz and 60 meters (200 ft) for 2.4 GHz. Outdoors with line of sight, range can exceed 100 meters.
How do I clean the AP-565?
Use a dry, lint-free soft cloth to wipe the exterior. Do not use water, solvents, or compressed air. Ensure the device is powered off and dry before reuse.
Is the AP-565 compatible with older Aruba controllers?
Yes, it works with Aruba Mobility Controller running AOS 8.x or later. It can also be managed via Aruba Central (cloud) in instant mode.
User questions about AP-565 Aruba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual AP-565 - Aruba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP-565 by Aruba.
USER MANUAL AP-565 Aruba
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Aruba
Model : AP-565
Category : Access Point