PSS-106 - Speaker DAP-Audio - Free user manual and instructions
Find the device manual for free PSS-106 DAP-Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive PA Speaker |
| Model | PSS-106 |
| Brand | DAP-Audio |
| Speaker Configuration | 2-way |
| Woofer Size | 6.5" (165 mm) |
| Tweeter Size | 1" (25 mm) compression driver |
| Power Handling (RMS) | 100 W |
| Power Handling (Peak) | 200 W |
| Impedance | 8 Ω |
| Frequency Response | 60 Hz - 20 kHz |
| Sensitivity (1W/1m) | 90 dB |
| Maximum SPL | 110 dB |
| Dimensions (W x H x D) | 200 x 300 x 200 mm |
| Weight | 5.0 kg |
| Enclosure Material | MDF with black carpet finish |
| Connectivity | 1 x Speakon, 1 x 1/4" jack |
| Mounting Options | Pole mount (35 mm), wall mount (optional) |
| Protection | Overload protection circuit |
| Recommended Amplifier | 100-200 W RMS at 8 Ω |
| Included Accessories | User manual |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Safety | Use with stable stand; do not overload |
| Repairability | Replaceable drivers; contact service center |
Frequently Asked Questions - PSS-106 DAP-Audio
What type of amplifier should I use with the DAP-Audio PSS-106?
Use an amplifier that delivers 100-200 W RMS into 8 Ω per channel. Ensure the amplifier is stable at 8 Ω and not bridged unless specified.
Can I use the PSS-106 outdoors?
The PSS-106 is designed for indoor use. If used outdoors, protect it from direct rain and moisture. Do not expose to extreme temperatures.
How do I connect the speaker to my mixer?
Connect the speaker using a Speakon or 1/4" jack cable from the amplifier output to the speaker input. Ensure the amplifier is off when connecting.
What is the impedance of the PSS-106?
The impedance is 8 Ω. You can connect multiple speakers in parallel, but the total impedance must not fall below the amplifier's minimum load (usually 4 Ω).
Does the PSS-106 have a built-in crossover?
Yes, it has an internal passive crossover network that splits the signal between the woofer and tweeter.
How should I clean the speaker cabinet?
Use a soft, dry cloth to wipe the cabinet. Avoid using solvents or water, as they may damage the finish. Keep the grille free of dust.
Can I mount the PSS-106 on a speaker stand?
Yes, it has a standard 35 mm pole mount socket. Use a sturdy stand rated for the speaker weight (5 kg). Always secure with a strap if necessary.
What is the frequency response of the PSS-106?
The frequency response is 60 Hz to 20 kHz, making it suitable for full-range PA applications. For deeper bass, add a subwoofer.
Are replacement parts available for the PSS-106?
Yes, replacement woofers, tweeters, and crossover components are available through DAP-Audio service centers. Contact local distributor for parts.
Why is there no sound coming from the speaker?
Check connections: ensure amplifier is on and signal is present. Verify the speaker cable is fully inserted. Test with another speaker to isolate the issue. If the problem persists, the speaker may be defective.
User questions about PSS-106 DAP-Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual PSS-106 - DAP-Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSS-106 by DAP-Audio.
USER MANUAL PSS-106 DAP-Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAP-Audio
Model : PSS-106
Category : Speaker