JLL022967 - Dishwasher Jocel - Free user manual and instructions
Find the device manual for free JLL022967 Jocel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Jocel |
| Model | JLL022967 |
| Dimensions (W x H x D) | 60 cm x 85 cm x 60 cm |
| Weight | Approx. 50 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Class | A++ |
| Number of Place Settings | 14 |
| Programs | Eco, Intensive, Quick, Glass, Auto |
| Noise Level | 44 dB(A) |
| Water Consumption | 10 L per cycle (Eco) |
| Energy Consumption | 0.92 kWh per cycle (Eco) |
| Drying System | Condensation drying |
| Control Type | Electronic with LED display |
| Safety Features | Child lock, leakage protection |
| Interior Material | Stainless steel |
| Adjustable Racks | Yes, foldable tines |
| Maintenance | Clean filters regularly, check rinse aid |
| Spare Parts Availability | Yes, through service centers |
| Manual Included | Yes, PDF available |
Frequently Asked Questions - JLL022967 Jocel
How to install the dishwasher?
Ensure the dishwasher is placed on a level surface. Connect the water inlet hose to a cold water supply (3/4 inch thread). Attach the drain hose to a suitable drain. Plug into a grounded outlet. Refer to the installation section of the manual for details.
What detergent should I use?
Use a dishwasher-specific detergent in powder, gel, or tablet form. For best results, choose a branded product. Fill the detergent dispenser according to the program length. Avoid using hand dishwashing soap.
How to clean the filters?
Turn off the dishwasher and remove the bottom rack. Rotate the coarse filter counterclockwise to remove it. Rinse both the coarse and fine filters under running water with a soft brush. Reassemble and turn clockwise to lock.
Why is the dishwasher not cleaning properly?
Check that filters are clean, spray arms are not blocked, and that you are using the correct amount of detergent. Ensure dishes are not overloaded and that the water temperature is adequate (50-60°C). Also verify that the water inlet valve is open.
What do the error codes mean?
Common error codes: E1 (water inlet failure), E4 (heater failure), E8 (overflow). Refer to the manual's troubleshooting section for a full list. If an error persists, contact customer support.
Can I use rinse aid?
Yes, rinse aid improves drying and prevents spots. Fill the rinse aid dispenser (located inside the door) until the reservoir is full. Adjust the dosage setting according to water hardness.
How to load dishes for best results?
Place larger items on the bottom rack, such as pots and pans, facing downward. Put glasses and cups on the top rack. Avoid nesting items and ensure spray arms can rotate freely. Face soiled surfaces toward the spray.
What is the delay start feature?
The delay start allows you to set the dishwasher to begin a cycle up to 24 hours later. Press the Delay button repeatedly to select the desired hours, then press Start. The dishwasher will start automatically at the set time.
How to descale the dishwasher?
Use a dishwasher descaling product or a mixture of citric acid. Run an empty cycle at high temperature (e.g., Intensive) with the descaler. Repeat every 3-6 months depending on water hardness.
What to do if the dishwasher leaks?
Check the water inlet and drain hose connections. Ensure the drain hose is not kinked. Inspect the door seal for dirt or damage. If the leak persists, turn off the water supply and contact a service technician.
User questions about JLL022967 Jocel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual JLL022967 - Jocel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JLL022967 by Jocel.