Steam EP - Coffee machine Slayer - Free user manual and instructions
Find the device manual for free Steam EP Slayer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Espresso Coffee Machine |
| Brand | Slayer |
| Model | Steam EP |
| Dimensions (W x D x H) | Approx. 30 x 60 x 50 cm |
| Weight | Approx. 35 kg |
| Power Supply | 220-240 V, 50/60 Hz |
| Power Consumption | 3000 W |
| Water Tank Capacity | 3.5 L |
| Boiler Type | Dual boiler (brew and steam) |
| Pump Pressure | 9 bar (adjustable) |
| Group Heads | 2 |
| Main Functions | Espresso brewing, steam wand for milk frothing, hot water dispenser, programmable pre-infusion |
| Cleaning and Maintenance | Backflush daily, descale quarterly, clean steam wand after each use |
| Safety Features | Overheat protection, safety valve, auto shut-off after 30 minutes of inactivity |
| Spare Parts and Repairability | Replaceable gaskets, shower screens, steam wand tips; user-serviceable with manual |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - Steam EP Slayer
How do I turn on the Slayer Steam EP?
Press the main power switch located on the left side of the machine. Wait for the boilers to heat up (about 15 minutes). The machine is ready when the brew boiler and steam boiler indicators are steady.
How often should I backflush the machine?
Backflushing should be performed daily after use. Use a blind filter and a suitable espresso machine cleaner. Run the cleaning cycle as per the manual.
Why is my espresso not extracting properly?
Common causes include a too fine grind, stale coffee, or a clogged shower screen. Adjust grind size, use fresh beans, and clean the shower screen regularly.
How do I descale the Slayer Steam EP?
Descale every 3 months using a descaling solution. Follow the manual: fill the water tank with descaling solution, run the descale program, then rinse thoroughly with fresh water.
Can I adjust the brew temperature?
Yes, the brew boiler temperature can be adjusted via the control panel. Press the menu button, navigate to temperature settings, and set within the recommended range (90-96°C).
The steam wand is not producing steam. What should I do?
Check that the steam boiler is on and has reached temperature. Ensure the steam knob is open. If still no steam, the wand tip may be blocked; clean it with a pin.
How do I clean the steam wand?
After each use, purge the wand by opening the steam valve for a few seconds. Wipe the exterior with a damp cloth. For deeper cleaning, remove the tip and soak in a descaling solution.
What type of water should I use?
Use filtered or softened water to prevent scale buildup. Avoid distilled or reverse osmosis water as it may cause corrosion. The ideal water hardness is between 50-100 ppm.
Why is the machine leaking water?
Check that the water tank is properly seated, and inspect the drain tube for clogs. If leaking from the group head, the gasket may need replacement. Contact a technician if unsure.
Where can I find replacement parts?
Replacement parts are available from Slayer authorized dealers or online. Common parts include gaskets, shower screens, drip trays, and steam wand tips. Refer to the manual for part numbers.
User questions about Steam EP Slayer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Coffee machine in PDF format for free! Find your manual Steam EP - Slayer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Steam EP by Slayer.
USER MANUAL Steam EP Slayer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Slayer
Model : Steam EP
Category : Coffee machine