VM114K - Electric meter HAGER - Free user manual and instructions
Find the device manual for free VM114K HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Meter (Single-Phase) |
| Model | VM114K |
| Brand | Hager |
| Dimensions (H x W x D) | 100 mm x 36 mm x 70 mm |
| Weight | 0.2 kg |
| Power Supply | 230 V AC, 50 Hz |
| Accuracy Class | Class B (MID approved) |
| Display | LCD, 6+1 digits |
| Rated Current (Iref) | 5 A (80 A max) |
| Communication | Pulse output (S0 interface) |
| Operating Temperature | -25°C to +55°C |
| Protection Class | IP20 (indoor use only) |
| Mounting | DIN rail (35 mm) |
| Maintenance | Clean with dry cloth; no user-serviceable parts |
| Safety | Install by qualified electrician; disconnect supply before work |
| Spare Parts & Repairability | Not user-repairable; replace entire unit if faulty |
| Standards | IEC 62053-21, MID 2014/32/EU |
| Certification | CE, UKCA |
Frequently Asked Questions - VM114K HAGER
How do I install the Hager VM114K meter?
Installation must be performed by a qualified electrician. Mount the meter on a 35 mm DIN rail inside a suitable enclosure. Connect the supply and load wires according to the wiring diagram provided in the manual. Ensure the meter is securely clipped onto the rail.
How to read the display on the VM114K?
The LCD display shows total kilowatt-hours (kWh) consumed. The value is typically 6 digits plus one decimal. Press the button (if present) to cycle through additional parameters like current power, voltage, or cumulative readings.
What is the accuracy class of the VM114K?
The meter is Class B as per EN 50470-3, providing accurate measurement within ±1% for typical loads. It is MID-approved for billing purposes.
Can the VM114K be used for three-phase installations?
No, the VM114K is a single-phase meter designed for 230 V AC systems. For three-phase applications, select a compatible Hager three-phase meter.
What is the pulse output used for?
The S0 pulse output (typically 1000 impulses/kWh) allows connection to external monitoring systems, energy management devices, or remote reading equipment.
How do I clean the meter?
Use a soft, dry cloth to wipe the outer casing. Do not use water, solvents, or abrasive cleaners. Ensure the meter is disconnected from the supply before cleaning.
What should I do if the meter displays an error?
An error code (e.g., Err 1, Err 2) indicates a malfunction. First, try resetting by disconnecting power for 10 seconds. If the error persists, contact a qualified electrician or Hager support for replacement.
Is the VM114K compatible with smart home systems?
The meter provides a standard pulse output that can be interfaced with many smart home controllers or energy monitors using an appropriate pulse counter module.
What are the dimensions of the VM114K?
The meter measures approximately 100 mm high, 36 mm wide, and 70 mm deep. It fits standard 35 mm DIN rail.
Where can I download the user manual for the VM114K?
The manual is available for free download on notice-facile.com in PDF format. Search for 'Hager VM114K' to access the document.
User questions about VM114K HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electric meter in PDF format for free! Find your manual VM114K - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VM114K by HAGER.
USER MANUAL VM114K HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : VM114K
Category : Electric meter