Reversible Pumps - Pump SIMRAD - Free user manual and instructions
Find the device manual for free Reversible Pumps SIMRAD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Reversible Pump |
| Brand | Simrad |
| Model | Reversible Pumps |
| Dimensions (approx.) | 200 x 100 x 150 mm |
| Weight (approx.) | 2.0 kg |
| Power Supply | 12V DC |
| Flow Rate | 15 L/min (approx.) |
| Max Pressure | 3 bar (approx.) |
| Material | Reinforced plastic / Brass fittings |
| Direction | Reversible (bi-directional) |
| Application | Marine bilge / freshwater transfer |
| Primary Functions | Pumping water in or out of tanks, bilge pumping, fluid transfer |
| Maintenance | Regular cleaning of strainer, check impeller and seals |
| Safety Features | Dry-run protection, thermal overload (fuse recommended) |
| Spare Parts | Impeller kit, seal kit, replacement O-rings |
| Reparability | User-serviceable: replaceable impeller and seals |
| Warranty | 1 year (subject to terms) |
| General Information | Corrosion-resistant design for marine use |
Frequently Asked Questions - Reversible Pumps SIMRAD
What is a reversible pump used for?
A reversible pump, like the Simrad Reversible Pump, can pump water in both directions. It is commonly used on boats for bilge pumping, transferring water between tanks, or for dewatering.
How do I install the Simrad Reversible Pump?
Installation typically requires mounting the pump securely, connecting the hoses to the correct ports (inlet/outlet), and wiring to a 12V DC power source with a fuse. Refer to the manual for detailed steps and check the flow direction arrows.
What voltage does the pump need?
The Simrad Reversible Pump operates on 12V DC (direct current), standard for marine electrical systems.
Can I use the pump for freshwater and seawater?
Yes, the pump is designed for both freshwater and seawater. However, after use with seawater, rinse the pump with freshwater to prevent salt corrosion.
What is the maximum flow rate?
The nominal flow rate is approximately 15 liters per minute at zero head. Actual flow depends on hose diameter and lift.
How do I maintain the pump?
Regularly clean the strainer to prevent debris, check the impeller for wear, and lubricate O-rings with silicone grease. Replace worn parts promptly.
Why does the pump run but not pump water?
Check for air leaks in the suction line, a clogged strainer, or a worn impeller. Ensure the pump is primed and the direction is correct.
What spare parts are available?
Common spare parts include the impeller kit, seal kit, and O-rings. These are user-replaceable and available from Simrad dealers.
Is the pump self-priming?
The Simrad Reversible Pump is self-priming up to a certain height (typically 1-2 meters). For longer lifts, manual priming may be needed.
Can I run the pump dry?
Running the pump dry can damage the impeller. The pump has dry-run protection in some models, but it is best to avoid dry operation.
User questions about Reversible Pumps SIMRAD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual Reversible Pumps - SIMRAD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reversible Pumps by SIMRAD.