DS4608 - Barcode Reader ZEBRA - Free user manual and instructions
Find the device manual for free DS4608 ZEBRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Barcode Scanner |
| Brand | Zebra |
| Model | DS4608 |
| Scan Technology | Imager (1280 x 960 pixels) |
| Scan Pattern | Area Imaging |
| Scan Angle | Horizontal: 42.4°, Vertical: 33° |
| Focus Distance | Near: 0.5 cm / Far: 60 cm (100% UPC) |
| Supported Barcodes | 1D, 2D, PDF417, Postal, Digimarc, OCR |
| Connectivity | USB, RS-232, Keyboard Wedge |
| Input Voltage | 5 V ± 10% |
| Power Consumption | Operating: <2.5 W; Standby: <0.5 W |
| Dimensions (L x W x H) | 16.4 x 7.1 x 9.8 cm (6.5 x 2.8 x 3.9 in) |
| Weight | 220 g (7.8 oz) |
| Drop Specification | 1.8 m (6 ft) onto concrete |
| IP Rating | IP42 |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 5% to 95% non-condensing |
| Warranty | 3 years |
| Included Items | Scanner, USB cable, Quick Reference Guide |
Frequently Asked Questions - DS4608 ZEBRA
How do I connect the DS4608 to my computer?
Connect the USB cable to the scanner and your computer. The scanner will be detected automatically. For RS-232, use a compatible cable and configure the serial port.
Do I need to install drivers?
On most systems, the DS4608 works as a HID keyboard wedge without drivers. For advanced features, download Zebra Scanner SDK from the Zebra website.
How do I clean the scanner window?
Use a soft, lint-free cloth slightly dampened with water or isopropyl alcohol. Gently wipe the window. Do not use abrasive cleaners or immerse the scanner.
The scanner beeps but does not decode barcodes. What should I do?
Ensure the barcode is clean and undamaged. Check if the barcode type is enabled by scanning a configuration barcode from the manual. Reset to factory defaults by scanning the appropriate barcode.
Can I scan barcodes from a mobile screen?
Yes, the DS4608 can scan 2D barcodes from electronic displays. Adjust the scan angle and distance for best results.
What is the maximum scan distance?
For a standard 100% UPC barcode, the maximum scan distance is approximately 60 cm (24 in). For smaller barcodes, the distance decreases.
How do I change the beeper volume?
Scan a configuration barcode from the product manual. You can set volume to high, medium, low, or mute.
The scanner is not recognized. How to troubleshoot?
Try a different USB port or cable. Verify the scanner is in the correct mode (HID or serial). On Windows, check Device Manager for unknown devices. Reinstall drivers if needed.
Can I use the scanner with a mobile device?
Yes, if the mobile device supports USB OTG. Use an OTG adapter and ensure the scanner is in HID mode. For iOS, additional accessories may be required.
How do I reset the scanner to factory defaults?
Scan the 'Restore Defaults' barcode located in the product manual. This clears all custom settings and returns the scanner to original configuration.
User questions about DS4608 ZEBRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual DS4608 - ZEBRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS4608 by ZEBRA.
USER MANUAL DS4608 ZEBRA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZEBRA
Model : DS4608
Category : Barcode Reader