LaserJet Pro M110w - Printer HP - Free user manual and instructions
Find the device manual for free LaserJet Pro M110w HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monochrome Laser Printer |
| Dimensions (W x D x H) | 380 x 293 x 259 mm |
| Weight | 6.8 kg |
| Power Supply | 110-240 V AC (50/60 Hz) |
| Print Speed (A4) | Up to 23 ppm |
| Print Resolution | 600 x 600 dpi (up to 1200 x 1200 dpi) |
| Connectivity | USB 2.0, Wi-Fi 802.11b/g/n |
| Paper Input Capacity | 150 sheets (standard tray) |
| Monthly Duty Cycle | Up to 20,000 pages |
| Duplex Printing | Manual (requires driver) |
| Display | 2-line backlit LCD |
| Processor Speed | 500 MHz |
| Memory | 128 MB (max 128 MB) |
| Cartridge Model | HP 149A (black) |
| Noise Level (Active) | 48 dB(A) |
| Operating Temperature | 15°C to 30°C |
| Energy Star Certified | Yes |
| Supported Media | A4, A5, A6, B5, envelopes, labels |
| Warranty | 1-year limited hardware warranty |
| Maintenance | Replace toner and pickup roller as needed |
Frequently Asked Questions - LaserJet Pro M110w HP
How do I connect my HP LaserJet Pro M110w to Wi-Fi?
Press the Wi-Fi button on the printer until the light starts blinking. Then use the HP Smart app on your computer or mobile device to complete the setup. The printer will appear in the list of available networks.
What type of toner cartridge does the M110w use?
The printer uses the HP 149A black toner cartridge. It yields approximately 1,600 pages.
How do I clear a paper jam?
Open the front cover and remove the toner cartridge. Gently pull any jammed paper from the rollers. Close the cover and reinstall the cartridge. The printer should resume automatically.
Can I print from my mobile device?
Yes, you can print using the HP Smart app (iOS/Android) or via AirPrint (iOS) and Mopria (Android). Ensure the printer is connected to the same Wi-Fi network.
How do I replace the toner cartridge?
Open the front cover, remove the old cartridge, unpack the new one, shake it gently (if instructed), and insert it until it clicks. Close the cover. The printer will initialize.
Why is my printer showing a 'Jam in Tray 1' error?
Check the paper tray for any wrinkled or stuck paper. Remove the paper stack, fan it, and reload it. Also inspect the pickup rollers for debris. If the error persists, refer to the manual.
What paper sizes are supported for manual duplex?
Manual duplex printing supports A4, A5, and B5 sizes. You need to flip the paper manually after the first side prints. The driver will prompt you.
How do I reset the printer to factory defaults?
Press and hold the Cancel and Wi-Fi buttons simultaneously for 10 seconds until the power light flashes. The printer restores factory settings and may reboot.
Is the HP LaserJet Pro M110w compatible with Windows 11?
Yes, the printer supports Windows 10 and 11. Download the latest driver from HP's support website or use the built-in driver through Windows Update.
How can I reduce noise when printing?
Enable Quiet Mode in the printer settings via the control panel or HP Smart app. This slows down printing but reduces noise.
User questions about LaserJet Pro M110w HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual LaserJet Pro M110w - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LaserJet Pro M110w by HP.