Oracode 660i - Smart Home Dormakaba - Free user manual and instructions
Find the device manual for free Oracode 660i Dormakaba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic Keypad Lock |
| Brand | Dormakaba |
| Model | Oracode 660i |
| Category | Smart Home |
| Dimensions | 120 x 70 x 30 mm (approx.) |
| Weight | 400 g (approx.) |
| Power Supply | 4 x AA alkaline batteries |
| Battery Life | Up to 12 months |
| Low Battery Warning | Audible and visual indicator |
| User Codes | Up to 100 master and user codes |
| Code Length | 4 to 10 digits |
| Operating Temperature | -10°C to 60°C |
| Water Resistance | IP54 (splash proof) |
| Mounting | Interior and exterior trim with latch |
| Key Override | Mechanical key included |
| Locking Mechanism | Deadbolt or latch (depending on door prep) |
| Audible Feedback | Configurable beeps |
| Visual Feedback | LED indicators |
| Installation | DIY with standard tools |
| Maintenance | Periodic cleaning with soft cloth; avoid harsh chemicals |
| Security Features | Anti-pick, anti-bump, anti-drill cylinder |
| Spare Parts | Available via Dormakaba service centers |
| Reparability | Repairable by authorized technicians |
| Certifications | CE, EN 14846 |
Frequently Asked Questions - Oracode 660i Dormakaba
How do I change the batteries on the Oracode 660i?
Locate the battery compartment on the interior side. Remove the cover, replace the 4 AA batteries with alkaline ones, and reattach the cover. Ensure correct polarity.
What should I do if the lock does not respond to my code?
First, check the batteries. If the LED flashes red, replace them. Then re-enter the code. If it still fails, perform a master code reset as described in the manual.
How can I add a new user code?
Enter the master code followed by #, then 0, then the new user code, then #. The lock will confirm with a green LED. Refer to the manual for detailed steps.
Can I delete a user code without resetting everything?
Yes. Enter master code # 0 2 followed by the user code # to delete that individual code. The lock will beep twice to confirm.
What is the default master code?
The default master code is 1234 unless changed. It is highly recommended to change it immediately after installation.
How do I change the master code?
Enter the current master code # 0 0, then new master code #, then repeat new master code #. The lock will confirm with a long beep.
Is the Oracode 660i weather-resistant?
Yes, it has an IP54 rating, making it splash-proof. However, avoid direct exposure to heavy rain or submersion.
What should I do if I lock myself out?
Use the included mechanical key to override the lock. If you don't have the key, contact a locksmith or Dormakaba support.
Can I use rechargeable batteries?
Alkaline batteries are recommended. Rechargeable NiMH batteries may have lower voltage and cause inconsistent operation.
How do I reset the lock to factory settings?
Press and hold the reset button inside the battery compartment for 5 seconds until the lock beeps and LED flashes. All codes will be cleared.
User questions about Oracode 660i Dormakaba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smart Home in PDF format for free! Find your manual Oracode 660i - Dormakaba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Oracode 660i by Dormakaba.
USER MANUAL Oracode 660i Dormakaba
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dormakaba
Model : Oracode 660i
Category : Smart Home