CRISP MAX - Effect machine Magmatic - Free user manual and instructions
Find the device manual for free CRISP MAX Magmatic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Effect Machine (Fog/Snow Machine) |
| Brand | Magmatic |
| Model | CRISP MAX |
| Dimensions (W x H x D) | Approx. 35 x 25 x 20 cm |
| Weight | Approx. 5 kg |
| Power Supply | 220-240V ~ 50/60Hz |
| Power Consumption | 1500 W |
| Fluid Tank Capacity | 1.5 L |
| Output Volume | Adjustable, up to 100 m³/min |
| Warm-up Time | Approx. 3-5 minutes |
| Control Interface | Manual buttons, optional remote control |
| Supported Fluids | Water-based fog/snow fluid only |
| Cleaning | Regular cleaning with distilled water after use |
| Safety Features | Thermal overload protection, low fluid cut-off |
| Spare Parts Available | Heating element, pump, fuse, nozzle |
| Repairability | Modular design; user-serviceable parts with manual |
| Certifications | CE, RoHS |
Frequently Asked Questions - CRISP MAX Magmatic
How long does the CRISP MAX take to warm up?
The warm-up time is approximately 3 to 5 minutes depending on ambient temperature and fluid viscosity.
What type of fluid should I use?
Only use water-based fog or snow fluids recommended by Magmatic. Using other fluids may damage the machine and void warranty.
Can I use the machine outdoors?
Yes, but avoid rain, direct sunlight, and temperatures below freezing to prevent malfunction or reduced output.
How do I clean the CRISP MAX after use?
Run distilled water through the system for a few minutes to flush out residual fluid. Empty the tank and allow to dry.
What does the low fluid cut-off do?
It automatically shuts off the heater and pump when the fluid level is too low, preventing damage to the heating element.
How can I control the output volume?
Use the adjustable knob on the machine or an optional remote control to regulate fan speed and pump output.
What safety features does the machine have?
It includes thermal overload protection and low fluid cut-off to prevent overheating and pump damage.
Can I repair the machine myself?
Basic maintenance and part replacement (e.g., fuse, nozzle) can be done by following the manual. For complex issues, contact Magmatic support.
What is the power consumption of the CRISP MAX?
The maximum power consumption is 1500 W during operation. A dedicated circuit is recommended.
Is the machine compatible with a DMX controller?
The standard model does not include DMX. An optional DMX module may be available from Magmatic for advanced control.
User questions about CRISP MAX Magmatic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual CRISP MAX - Magmatic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CRISP MAX by Magmatic.
USER MANUAL CRISP MAX Magmatic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Magmatic
Model : CRISP MAX
Category : Effect machine