PE8208G - Power strip ATEN - Free user manual and instructions
Find the device manual for free PE8208G ATEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | ATEN |
| Model | PE8208G |
| Product type | Intelligent power strip (PDU) with meter |
| Number of outlets | 8 IEC C13 outlets |
| Input voltage | 230 V AC |
| Rated current | 16 A |
| Maximum power | 3680 W |
| Power cable type | IEC C20 to mains plug (Schuko) cable |
| Mounting | 19" rack, 1U, with mounting kit included |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
| Weight | 2.1 kg |
| Housing material | Steel with shockproof coating |
| Protection | Surge arrester and overvoltage protection |
| Indicator light | Current LED per outlet and digital display |
| Measurement functions | Current (A), voltage (V), power (W), power factor, energy consumption (kWh) |
| Control interface | RJ45 Ethernet port, Web GUI, SNMP, Telnet, SSH |
| Operating temperature | 0 to 40 °C |
| Relative humidity | 20% to 80% non-condensing |
| Certifications | CE, FCC, RoHS |
| Cleaning | Soft dry cloth; do not use abrasive products |
| Spare parts and repairability | Replaceable power cord; repair by an authorized professional |
Frequently Asked Questions - PE8208G ATEN
What is the input voltage of the PE8208G?
The PE8208G operates at 230 V AC, with a tolerance range of ±10%.
How to install the power strip in a rack?
Use the provided mounting kit to attach the rack brackets. Insert the device into the rack, aligning the holes, then tighten the screws. Connect the power cord and plug in the network cable.
Can I control each outlet individually?
No, the PE8208G is a metered PDU without individual switching. All outlets are powered simultaneously.
How to reset the energy meter display?
The display cannot be reset manually; the cumulative energy consumption (kWh) value is stored and can only be reset via the network management interface.
What to do if the power strip does not turn on?
Check that the power cord is properly connected and the mains outlet is powered. If the indicator remains off, test with another cord. If the problem persists, contact ATEN support.
Is the PE8208G compatible with 110 V servers?
No, this device is designed for 230 V only. Use under 110 V may damage the equipment.
How to access the web interface?
Connect to the network via the Ethernet port, then open a browser and enter the default IP address (192.168.0.100). The default username and password are 'admin'.
Is there a replacement fuse?
The device does not have an accessible fuse. Overcurrent protection is built into the internal circuit. In case of a fault, the internal circuit breaker trips.
What is the recommended cleaning method?
Use a soft, dry cloth to dust the housing. Never use liquid products, solvents, or abrasives.
Can I repair the device myself?
No user-serviceable parts are inside. Opening the housing voids the warranty. Entrust any repair to an ATEN authorized technician.
User questions about PE8208G ATEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power strip in PDF format for free! Find your manual PE8208G - ATEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PE8208G by ATEN.
USER MANUAL PE8208G ATEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ATEN
Model : PE8208G
Category : Power strip